SCD0219-01E

LENGTH: 0.800" +.000"/-.010"
WIDTH: 0.087" +/-.002"
TRUNCATION OF ACUTE ANGLE: 0.003" +/-.001" WIDE
ACUTE ANGLE: 28deg +/-1/2deg.
FLATNESS: 0.0005" MAXIMUM, HYPOTENUSE FACE ONLY.
WITH 0.002" MAXIMUM ROLL OFF AT ENDS.
SURFACE FINISH: 2 MICROINCH OR BETTER, HYPOTENUSE
FACE ONLY. ALL OTHERS 32 MICROINCH
WITH AN OPTIONAL POLISH ON THE
0.800" X 0.003" SURFACE.
EDGE BEVEL (OPTIONAL): 0.006"+.003"/-.000" X 45deg
+/-1deg, LOCATED ON THE
EDGES OF THE SIDE OPPOSITE
THE 0.800" X 0.003" SURFACE
MATERIAL QUALITY: OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: RANDOM.

SCD2231-02A

CONFIGURATION: RECTANGULAR BAR, PLANE-PARALLEL
WIDTH: 0.158"+/-.006" HEIGHT: 0.118"+/-.006"
LENGTH: 2.000"+/-.030"
SQUARENESS & PARALLELISM: 0.0005" MAXIMUM T.I.R.
EDGE BEVELS: 0.002" MAXIMUM, ALL EDGES.
SURFACE FINISH: 320 GRIT GRIND & VISUAL POLISH
80-50 PER MIL-PRF-13830, ALL FACES
MATERIAL TYPE/QUALITY: SAPPHIRE, CSI HEMLITE.
CRYSTALLOGRAPHIC ORIENTATION:
0.118" X 0.158" FACES TO BE M-PLANE +/- 2deg
2.000" X 0.118" FACES TO BE C-PLANE +/- 2deg
COATING: NONE, NOT REQUIRED.

SCD2232-02A

CONFIGURATION: RECTANGULAR BAR, PLANE-PARALLEL
WIDTH: 0.158"+/-.006" HEIGHT: 0.118"+/-.006"
LENGTH: 2.000"+/-.030"
SQUARENESS & PARALLELISM: 0.0005" MAXIMUM T.I.R.
EDGE BEVELS: 0.002" MAXIMUM, ALL EDGES.
SURFACE FINISH: 320 GRIT GRIND & VISUAL POLISH
80-50 PER MIL-PRF-13830, ALL FACES
MATERIAL TYPE/QUALITY: SAPPHIRE, CSI HEMLITE.
CRYSTALLOGRAPHIC ORIENTATION:
0.118" X 0.158" FACES TO BE A-PLANE +/- 2deg
2.000" X 0.118" FACES TO BE C-PLANE +/- 2deg
COATING: NONE, NOT REQUIRED.

SCD2233-02A

CONFIGURATION: RECTANGULAR BAR, PLANE-PARALLEL
WIDTH: 0.158"+/-.006" HEIGHT: 0.118"+/-.006"
LENGTH: 2.000"+/-.030"
SQUARENESS & PARALLELISM: 0.0005" MAXIMUM T.I.R.
EDGE BEVELS: 0.002" MAXIMUM, ALL EDGES.
SURFACE FINISH: 320 GRIT GRIND & VISUAL POLISH
80-50 PER MIL-PRF-13830, ALL FACES
MATERIAL TYPE/QUALITY: SAPPHIRE, CSI HEMLITE.
CRYSTALLOGRAPHIC ORIENTATION:
0.118" X 0.158" FACES TO BE R-PLANE +/- 2deg
2.000" X 0.158" FACES TO BE A-PLANE +/- 2deg
COATING: NONE, NOT REQUIRED.

SCD3336-02A

CONFIGURATION: BAR, WEDGED BOTH ENDS
WIDTH: 0.250"+/-.002"
HEIGHT: 0.250"+/-.002"
LENGTH: 1.145"+/-.002"
WEDGE ANGLE: ONE END INCLINED 45deg +/- 10 ARC
(SEE DWG) MINUTES FROM SIDE (45deg FROM NORMAL)
OTHER END INCLINDED 52deg +/- 10 ARC
MINUTES FROM SIDE (38deg FROM NORMAL)
EDGE BEVEL: LIGHT PROTECTIVE BEVEL, ALL EDGES.
FLATNESS: 10 WAVES MAXIMUM @ 633nm, ALL FACES.
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: C-AXIS PERPENDICULAR
TO THE 0.250" X
0.250" FACES.
COATING: NONE, NOT REQUIRED.

SCD3336-03A

CONFIGURATION: BAR, WEDGED BOTH ENDS
WIDTH: 0.250"+/-.002"
HEIGHT: 0.250"+/-.002"
LENGTH: 1.145"+/-.002"
WEDGE ANGLE: ONE END INCLINED 45deg +/- 10 ARC
(SEE DWG) MINUTES FROM SIDE (45deg FROM NORMAL)
OTHER END INCLINDED 52deg +/- 10 ARC
MINUTES FROM SIDE (38deg FROM NORMAL)
EDGE BEVEL: LIGHT PROTECTIVE BEVEL, ALL EDGES.
FLATNESS: 10 WAVES MAXIMUM @ 633nm, ALL FACES.
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: C-AXIS PERPENDICULAR
TO THE 0.250" X
0.250" FACES.
COATING: NONE, NOT REQUIRED.

SCD3570-02A

CONFIGURATION: BAR, WEDGED ONE END
WIDTH: 0.250"+/-.005"
HEIGHT: 0.250"+/-.005"
LENGTH: 1.140"+/-.010"
WEDGE ANGLE: ONE END INCLINED 90 Deg +/- 10 ARC
(SEE DWG) MINUTES FROM SIDE (0 Deg FROM NORMAL)
OTHER END INCLINED 52 Deg +/- 10 ARC
MINUTES FROM SIDE(38 Deg FROM NORMAL)
EDGE BEVEL: LIGHT PROTECTIVE BEVEL, ALL EDGES.
FLATNESS: 10 WAVES MAXIMUM @ 633nm, ALL FACES.
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: RANDOM.
COATING: NONE, NOT REQUIRED.