SCD2718-01B

CONFIGURATION: PLATE, PLANE-PARALLEL
LENGTH: 20.00mm +/- 0.10mm
WIDTH: 8.00mm +/- 0.10mm
THICKNESS: 3.00mm +/- 0.10mm
CORNER BEVEL: LIGHT PROTECTIVE BEVEL, 4 PLACES.
EDGE BEVEL: LIGHT PROTECTIVE BEVELS ALL EDGES.
SURFACE ACCURACY: 1/10 WAVE MAXIMUM OVER 95% C.A.
SURFACE QUALITY: 20-10 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE
CRYSTALLOGRAPHIC ORIENTATION: (0001) NOMINAL
COATING: ANTIREFLECTIVE COAT FOR MAXIMUM
TRANSMISSION AT 808 NANOMETERS WITH A
NORMAL INCIDENCE ANGLE, APPLIED TO
ONE FACE ONLY.

SCD3232-01A

CONFIGURATION: PLATE, PLANE-PARALLEL
LENGTH: 33.318mm +/- 0.025mm
WIDTH: 12.158mm +/- 0.025mm
THICKNESS: 1.000mm +/- 0.025mm
CORNER BEVEL: 1.955mm +/- 0.025mm X 45deg, 4 PLACE
EDGE BEVEL: 0.075mm / 0.250mm X 45deg, ALL EDGES.
SURFACE ACCURACY: < 1/2 WAVE/INCH @ 633nm, 2 FACES
TRANSMITTED WAVEFRONT ERROR: 1/8 MAXIMUM @ 633nm.
SURFACE QUALITY: 20-10 PER MIL-PRF-13830, 2 FACES.
PARALLELISM: < 20 MICRONS T.I.R.
CLEAR APERTURE: DEFINED BY A 1.30mm BORDER, 2 PLCS
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001).
COATING: BROADBAND ANTIREFLECTIVE COATING FOR
1.20% MAXIMUM REFLECTANCE FROM 420nm TO
1000nm WITH A NORMAL +/- 17 DEGREE
INCIDENCE ANGLE, APPLIED TO BOTH FACES.
ENVIROMENTAL REQUIREMENTS PER NOTE 11 ON
DRAWING.

SCD3270-02A

LENGTH: 82.00mm + 0.00mm /- 0.10mm
WIDTH: 60.00mm + 0.00mm /- 0.10mm
CORNER RADII: 50.00mm NOM. X 1.00mm, 4 PLACES.
THICKNESS: 1.50mm +/- 0.10mm
PARALLELISM: 10 ARC SECONDS MAXIMUM.
EDGE BEVEL: LIGHT PROTECTIVE BEVEL, ALL EDGES.
FLATNESS: 2 WAVES/INCH MAXIMUM @ 633nm, 2 FACES.
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001).
COATING: NONE, NOT REQUIRED.
NOTE: CORNER RADII ARE RESIDUAL FROM SHAPING A
100.00mm DIAMETER PART.

SCD3502-02A

CONFIGURATION: RECTANGULAR PLATE, PLANE-PARALLEL.
LENGTH: 20.00mm +/- 0.10mm
WIDTH: 7.10mm +/- 0.10mm
THICKNESS: 2.50mm +/- 0.10mm
PARALLELISM: 5 ARC MINUTES MAXIMUM.
CORNER BEVELS: 0.10mm NOMINAL X 45deg, 4 PLACES.
EDGE BEVELS: 0.10mm NOMINAL X 45deg, 8 PLACES.
SURFACE ACCURACY: 1/10 WAVE MAXIMUM @ 633nm,
2 FACES.
SURFACE QUALITY: 10-5 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001)
COATING: NONE, NOT REQUIRED.

SCD3533-01A

CONFIGURATION: PLATE, PLANE-PARALLEL
LENGTH: 20.00mm + 0.00mm /- 0.10mm
WIDTH: 8.00mm + 0.00mm /- 0.10mm
THICKNESS: 3.00mm +/- 0.05mm
CORNER BEVEL: LIGHT PROTECTIVE BEVEL, 4 PLACES
EDGE BEVEL: LIGHT PROTECTIVE BEVEL, ALL EDGES.
PARALLELISM: 10 ARC SECONDS MAXIMUM.
SURFACE ACCURACY: 1/5 WAVE MAXIMUM @ 633nm,
2 FACES.
SURFACE QUALITY: 20-10 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001).
COATING: ANTIREFLECTIVE COATED FOR MAXIMUM
TRANSMISSION AT 808nm WITH A NORMAL
INCIDENCE ANGLE, APPLIED TO ONE FACE
ONLY.

SCD3689-02A

LENGTH: 0.875"+/-.002"
WIDTH: 0.4375"+/-.0020"
CORNER BEVELS: 0.040"+/-.002" X 45deg, 4 PLACES.
THICKNESS: 0.165"+/-.002" (HIGH SIDE OF WEDFGE)
WEDGE ANGLE: 1.00 DEGREE +/- 0.10 DEGREE
WEDGE DIRECTION: ALONG THE 0.875" LENGTH.
EDGE BEVELS: LIGHT PROTECTIVE BEVEL ALL EDGES.
SURFACE ACCURACY: NOT SPECIFIED.
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: c-PLANE
COATING: NONE, NOT REQUIRED.

SCD3753-02A

LENGTH: 2.187"+/-.005" WIDTH: 1.187"+/-.005"
THICKNESS: 0.0385"+/-.0035"
PARALLELISM: 3 ARC MINUTES MAXIMUM.
FLATNESS: 5 WAVES/INCH MAXIMUM, 2 FACES.
SURFACE FINISH: 80-50 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: RANDOM.
COATING: NONE, NOT REQUIRED.

SCD3854-02A

Length: 70.00mm +/- 0.10mm Width: 32.00mm +/- 0.10mm Thickness: 2.00mm +/- 0.10mm Parallelism: Not Specified. Edge Bevels: 0.25mm Maximum x 45 Degrees, All Edges and Corners. Flatness: 10 Fringes Maximum @ 633nm Over Any 25mm Diameter Within Clear Aperture, Both Faces. Surface Quality: F-F Per ANSI/OEOSC OP1.002-2009, Both Faces. Surface Roughness: < 1.50nm Ra, Both Faces. Clear Aperture: Central 60mm X 26mm Rectangular Area, Both Faces. Material Type/quality: Sapphire, Optical Grade Crystallographic Orientation: c-Plane Coating: None, Not Required.

SCD4111-02A

Length: 75.00mm +/- 0.05mm Width: 50.00mm +/- 0.05mm Corner Bevels: Light Protective Bevel, 4 Corners Thickness: 3.20mm +/- 0.05mm Edge Bevels: Light Protective Bevel, 8 Edges Parallelism: Not Specified Flatness: 2 Waves Maximum @ 633nm, Both Faces Surface Quality: 60-40 Per MIL-PRF-13830, Both Faces Clear Aperture: Not Specified Material Type/quality: Sapphire, Optical Grade Crystallographic Orientation: c-Plane Coating: None, Not Required

SCD4142-02A

Length: 114.710mm + 0.000mm /- 0.075mm Width: 12.500mm + 0.000mm /- 0.075mm Corner Bevels: 0.10mm +/- 0.08mm x 45 Degrees, 4 Places Thickness: 1.016mm +/- 0.075mm Parallelism: < 10 Arc Seconds Over Clear Aperture. Edge Bevels: 0.10mm +/- 0.08mm X 45 Degrees, 8 Places Transmitted Wavefront: < 1/4 Wave @ 0.633nm Over Clear Aperture, Best Effort Only. Surface Quality: 10-5 Per MIL-PRF-13830, Both Faces. Clear Aperture: Central 85% of the Rectangular Area, Both Faces. Material Type / Quality: Sapphire, Laser Grade. Crystallographic Orientation: c-Plane Coating: None, Uncoated Substrate

SCD4175-02A

Diameter: 0.750"+/-.002" Thickness: 0.020"+/-.002" Parallelism: 3 Arc Minutes Maximum. Edge Bevel: 0.003"/0.007" x 45 Degrees, Both Edges Flatness: 10 Waves Per Inch Maximum @ 633nm, Both Faces Surface Finish: 80-50 Per MIL-PRF-13830, Both Faces Material Type / Quality: Sapphire, Optical Grade. Crystallographic Orientation: c-Plane

SCD4178-03A

Length: 0.730"+/-.003" Width: 0.337"+/-.003" Corner Bevels: 0.030"+/-.003" x 45 Degrees, 4 Places Edge Bevels: 0.005"+/-.003" X 45 Degrees, All Edges (All Around Both Faces Including Corners) Thickness: 0.035"+/-.002" Parallelism: < 10 Arc Minutes Transmitted Wavefront Error: 1/4 Wave Maximum @ 633nm Surface Quality: E-E Per MIL-C-48497A, Both Faces. Material Type / Quality: Sapphire, Optical Grade Produced by Kyropolus Method Crystallographic Orientation: c-Plane +/- 2 Degrees Coating / Metallization: None, Not Required

SCD4210-02A

Length: 11.00mm +/- 0.05mm Width: 4.00mm +/- 0.05mm Corner Bevels: Light Protective Bevel, 4 Places Thickness: 0.50mm +/- 0.05mm Parallelism: 1 Arc Minute Maximum Edge Bevels: Light Protective Bevel, 8 Places Flatness: 1/4 Wave Maximum @ 633nm, Both Faces Surface Quality: 60-40 Per MIL-PRF-13830, Both Faces Material Type / Quality: Sapphire, Optical Grade Crystallographic Orientation: c-Plane Coating: None, Not Required

SCD4233-02A

Outer Length: 1.614"+/-.005" Outer Width: 1.334"+/-.005" Inner Length: 1.454"+/-.005" Inner Width: 1.174"+/-.005" Radii at Intersecting Faces: 0.025"+/-.005" Overall Thickness: 0.158"+/-.005" Major Rectangular Face Thickness: 0.058"+/-.005" Minor Rectangular Face Height: 0.100" Reference Only Edge Bevels: 0.005"/0.010" x 45 Degrees, All Edges Surface Accuracy: Power: 8 Fringes Maximum @ 633nm, Both Faces Irregularity: 5 Fringes Maximum @ 633nm, Both Faces Transmitted Wavefront Error: 0.125 Waves RMS Maximum @ 633nm Surface Quality: 1x.05;l1x0.08;e0.5 Per ISO 10110 Material Type / Quality: Sapphire, Optical Grade Coating: None, Not Required

SCD4244-02B

Length: 2.300"+.000"/-.005" Width: 1.100"+.000"/-.005" Thickness: 0.987mm +/- 0.005mm Edge Bevel: 0.010" Maximum x 45 Degrees, All Edges Cylindrical Radius Edge: 7.500"+.000"/-.010" (1 Place) Radius Edge Position: Centered to Length Dimension Parallelism: 0.010mm Maximum T.T.V. Over Any 24.00mm X 19.90mm Sub-Aperture Clear Aperture: Central 52.80mm X 21.50mm Rectangular Area, Both Faces T.W.F.E: 200nm RMS Maximum @ 633nm Over Any 24.00mm X 19.90mm Sub-Aperture Surface Roughness: 7 Angstroms RMS Maximum, Both Faces Surface Quality: 20-10 Per MIL-PRF-13830, Both Faces Material Type / Quality: Sapphire, Optical Grade Crystallographic Orientation: c-Plane Drawing: D504364-01 Rev.A (Marked-Up)

SCD4268-02A

Length: 20.10mm + 0.00mm /- 0.10mm Width: 11.10mm + 0.00mm /- 0.10mm Thickness: 1.00mm +/- 0.05mm Corner Bevels: Light Protective Bevel, 4 Places Edge Bevels: Light Protective Bevels, 8 Places Parallelism: 1 Arc Minute Maximum Flatness: 1/2 Wave Maximum @ 633nm, Both Faces Surface Quality: 60-40 Per MIL-PRF-13830, Both Faces Clear Aperture: Central 18.10mm X 10.00mm Rectangular Area, Both Faces Material Type / Quality: Sapphire, Optical Grade Crystallographic Orientation: c-Plane Coating: None, Not Required

SCD4277-01A

Length: 116.00mm +/- 0.13mm Width: 78.00mm +/- 0.13mm Thickness: 3.00mm +/- 0.13mm Corner Bevels: 0.20mm Nominal x 45 Degrees, 4 Places Edge Bevels: 0.20mm Nominal x 45 Degrees, 8 Places Parallelism: 10 Arc Minutes Maximum Flatness: 1/2 Wave Maximum @ 633nm, Both Faces. Surface Quality: 60-40 Per MIL-PRF-13830, Both Faces. Clear Aperture: Central 98.00mm x 72.00mm Rectangular Area, Both Faces. Material Type / Quality: Sapphire, Optical Grade. Crystallographic Orientation: c-Plane Coating: Broad-band Antireflective Coated for 0.50% Maximum Reflectance Per Surface and Also 98.0% Minimum Average Transmission Both Over the Range of 400nm to 700nm, With a Normal Incidence Angle, Applied to Both Faces.

SCD4281-01A

Length: 15.00mm +/- 0.10mm Width: 12.00mm +/- 0.10mm Thickness: 0.500mm +/- 0.025mm Corner Bevels: Light Protective Bevel, 4 Places Edge Bevels: Light Protective Bevel, 8 Places Parallelism: 3 Arc Minutes Maximum Transmitted Wavefront Error: 1/4 Wave Maximum @ 633nm. Surface Quality: 40-20 Per MIL-PRF-13830, Both Faces Material Type / Quality: Sapphire, Optical Grade. Crystallographic Orientation: C-Plane Coating: Antireflective Coated for < 0.50% Reflectance Per Surface From 1380nm to 1600nm With a Normal Incidence Angle, Applied to Both Faces

SCD4306-02A

Length: 67.00mm +/- 0.10mm Width: 15.00mm +/- 0.10mm Thickness: 1.00mm +/- 0.050mm Corner Bevels: 0.30mm +/- 0.10mm x 45 Degrees, 4 Places Edge Bevels: 0.15mm +/- 0.075mm x 45 Degrees, 8 Places Parallelism: 5 Arc Minutes Maximum Flatness: 8 Fringes Per Inch Maximum @ 633nm, Both Faces Surface Quality: 60-40 Per MIL-PRF-13830, Both Faces. Material Type / Quality: Sapphire, Optical Grade. Crystallographic Orientation: c-Plane

SCD4317-02A

Length: 0.510"+.000"/-.005" Width: 0.250"+.000"/-.005" Thickness: 0.250"+/-.005" (at the Start of the 2.50 Degree Wedged End) Corner Bevels: Light Protective Bevel, 4 Places Edge Bevels: Light Protective Bevels, 8 Places Wedge Angles: 2.50 Degrees + 0.25 Degree / - 0.00 Degree (One Face) 2.00 Degrees + 0.00 Degree /- 0.25 Degree (Other Face) Flatness: Not Specified Surface Quality: 60-40 Per MIL-PRF-13830, Both Faces. Material Type / Quality: Sapphire, Optical Grade. Crystallographic Orientation: c-Plane Coating: None, Not Required