A61E10590080

DIAMETER: 0.590"+/-.0020"
THICKNESS: 0.080"+/-.0020"
WEDGE ANGLE: 0.5 TO1.0 DEG
FLATNESS: 10 WAVES/INCH MAXIMUM, 2 FACES.
SURFACE FINISH: 80-50 PER MIL-O-13830, 2 FACES.
MATERIAL QUALITY: OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: C-AXIS (0001)

SCD1923-02A

DIAMETER: 9.00mm + 0.00mm /- 0.10mm
THICKNESS: 0.50mm +/- 0.05 (AT LOW SIDE OF WEDGE)
WEDGE ANGLE: 0.50 DEGREES +/- 0.10 DEGREES
FLATNESS: NOT SPECIFIED
SURFACE FINISH: 60-40 PER MIL-O-13830, 2 FACES.
MATERIAL QUALITY: OPTICAL GRADE (AS-SUPPLIED).
CRYSTALLOGRAPHIC ORIENTATION: C-AXIS PERPENDICULAR
TO FACES, (0001) NOMINAL
MARKING: MARK ARROW ON THE OD SURFACE POINTING
TOWARDS THE LOW SIDE OF THE WEDGE.
COATING: NONE, UNCOATED SUBSTRATE.

SCD1952-01A

DIAMETER: 1.000"+.000"/-.010"
CENTER THICKNESS: 0.350"+/-.020"
WEDGE ANGLE: 20.0 DEGREES +/- 0.10 DEGREE
EDGE BEVEL: PROTECTIVE EDGE BREAK, 2 PLACES.
SURFACE ACCURACY: 1/4 WAVE MAXIMUM, 2 FACES.
SURFACE QUALITY: 60-40 PER MIL-O-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001)
COATING: ANTIREFLECTIVE COATING FOR MAXIMUM
TRANSMISSION FROM 1.0 TO 2.5 MICRONS
WITH A NORMAL INCIDENCE ANGLE, APPLIED
TO BOTH FACES.

SCD2048-01A

CONFIGURATION: DISC, PLANE-WEDGED
DIAMETER: 12.00 +/- 0.20mm
THICKNESS: 3.00 +/- 0.50mm @ HIGH SIDE OF WEDGE
WEDGE ANGLE: 20.0 MINUTES +/- 5.0 MINUTES
EDGE BEVEL: 0.25mm MAXIMUM X 45deg, 2 PLACES.
SURFACE ACCURACY: WEDGED FACE: 1/4 WAVE MAXIMUM
OVER CENTRAL 5.50mm DIAMETER.
NON-WEDGED FACE: 1/10 WAVE
MAXIMUM OVER CENTRAL 11.00mm
DIAMETER.
SURFACE QUALITY: 40-20 PER MIL-O-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001) NOMINAL
MARKING: ARROW ON OD SURFACE POINTING TOWARDS
THE NON-WEDGED FACE.
COATING: COAT PER SPECIFICATION SHEET SCD2048.

SCD2634-01A

DIAMETER: 0.300"+/-.005"
THICKNESS: 0.040"+/-.002" (HIGH SIDE OF WEDGE)
WEDGE ANGLE: 20 ARC MINUTES +/- 5 ARC MINUTES.
FLATNESS: 10 WAVES/INCH MAXIMUM, 2 FACES.
SURFACE FINISH: 20-10 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: RANDOM.
COATING: ANTIREFLECTIVE COATING FOR MINIMUM
REFLECTANCE PER SURFACE AT 1.37 MICRONS
WITH A NORMAL INCIDENCE ANGLE, APPLIED
TO BOTH FACES.
POLARIZATION: RANDOM.

SCD2777-02D

DIAMETER: 100.00mm +/- 0.10mm
THICKNESS: 2.00mm +/- 0.10mm HIGH SIDE AT OD FLAT
WEDGE ANGLE: 1.30 mrad +/- 0.30 mrad (4.5 MINUTE)
FLATNESS: 1 WAVE/INCH MAXIMUM @ 633um, 2 FACES.
OD FLAT SIZE: 32.50mm +/- 2.50mm WIDE, ONE PLACE
OD FLAT LOCATION: PERPENDICULAR TO A-AXIS.
EDGE BEVEL: LIGHT PROTECTIVE BEVEL, 2 PLACES.
SURFACE FINISH: 20-10 PER MIL-PRF-13830, 2 FACES.
SURFACE ROUGHNESS: 25 ANGSTROMS MAXIMUM, 2 FACES.
EDGE CHIPS: 0.50mm MAXIMUM.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE
CRYSTALLOGRAPHIC ORIENTATION: (0001).
COATING: NONE, NOT REQUIRED

SCD3015-02A

DIAMETER: 0.625"+/-.002"
THICKNESS: 0.072"+/-.002" (LOW SIDE)
WEDGE ANGLE: 3.0 DEGREES +/- 0.25 DEGREE
EDGE BEVELS: LIGHT PROTECTIVE BEVEL, 2 PLACES.
SURFACE ACCURACY: NOT SPECIFIED.
SURFACE FINISH: 80-50 PER MIL-PRF-13830, 2 FACES.
CLEAR APERTURE: CENTRAL 85% OF DIAMETER FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: RANDOM.
COATING: NONE, NOT REQUIRED.

SCD4208-02A

Diameter: 2.000"+.000"/-.004" Thickness: 0.197"+/-.004" (High Side of Wedge) Edge Bevel: Light Protective Bevel, Both Edges Wedge Angle: 2.0 Degrees +/- 10 Arc Minutes Surface Accuracy: Not Specified. Surface Quality: 60-40 Per MIL-PRF-13830, Both Faces Material Type / Quality: Sapphire, Optical Grade Crystallographic Orientation: c-Plane Coating: None, Uncoated Substrate

SCD4243-02A

Diameter: 0.750"+.000"/-.004" Thickness: 0.250"+/-.002" (Low Side of Wedge) 0.2895" Reerence Only (High Side of Wedge) Edge Bevels: Light Protective Bevel, Both Edges Wedge Angle: 3.0 Degrees +/- 10 Arc Minutes Surface Accuracy: Not Specified. Surface Quality: 60-40 Per MIL-PRF-13830, Both Faces Material Type / Quality: Sapphire, Optical Grade Crystallographic Orientation: c-Plane Marking: Arrow on OD Surface Pointing Towards Wedged Face at the High Side of the Wedge Coating: None, Uncoated Substrate

SCD4252-02A

Diameter: 50.80mm + 0.00mm /- 0.10mm Thickness: 2.50mm +/- 0.10mm (High Side of Wedge) Wedge Angle: 30 Arc Minutes +/- 3 Arc Minutes Edge Bevels: 0.25mm Nominal x 45 Degrees, Both Edges Flatness: 2 Waves Maximum @ 633nm, Both Faces Surface Quality: 10-5 Per MIL-PRF13830, Both Faces Clear Aperture: Central 45.72mm of Diameter Faces Material Type/ Quality: Sapphire, Optical Grade Crystallographic Orientation: c-Plane Coating: None, Not Required

SCD4321-02A

Diameter: 2.005"+.000"/-.010" Thickness: 0.196"+/-.005" (High Side of Wedge) Edge bevels: 0.025" Maximum Face Width, Both Egdes Wedge: 4.0 Degrees +/- 30 Arc Minutes Suirface Figure: Power: 1 Wave Maximum @ 633nm, Both Faces Irregularity: 1/2 Wave Maximum @ 633nm, Both Faces Surface Quality: 40-20 Per Mil-PRF-13830, Both Faces Surface Roughness: < 50 Angstroms RMS, Both Faces Clear Aperture: Central 1.700" Diameter, Both Faces Material Type / Quality: Sapphire, Optical Grade Crystallographic Orientation: c-Plane Coating: None, Not Required

SCD4373-02A

Diameter: 25.40mm +.000/- 0.10mm Thickness: 20.50mm +/- 0.10mm (High Side of Wedge) 10.00mm Reference Only (Low Side of Wedge) Wedge Angle: 22.50 Degrees +/- 1.0 Degree Edge Bevels: 0.20mm / 0.30mm x 45 Degrees, Both Edges Surface Accuracy: Power: 5 Fringes Maximum @ 633nm, Both Faces Irregularity: 3 Fringes Maximum @ 633nm, Both Faces Surface Quality: 60-40 per MIL-PRF-13830, Both Faces Material Type / Quality: Sapphire, Optical Grade Marking: "Al203" per Drawing T0026368 Coating: None, Not Required