SCD1450-01A

CONFIGURATION: PLATE, PLANE-PARALLEL
LENGTH: 46.00mm +/- 0.05mm
WIDTH: 36.12mm +/- 0.05mm
THICKNESS: 8.00mm +/- 0.10mm
PARALLELISM: NOT SPECIFIED.
EDGE BEVELS: 0.50mm MAXIMUM FACE WIDTH, ALL EDGES.
SURFACE FIGURE: 2 FRINGES MAXIMUM, POLISHED FACE.
SURFACE QUALITY: 40-20 PER MIL-O-13830, POLISHED
FACE, BACK FACE FINE GROUND.
MATERIAL TYPE/QUALITY: PYREX GLASS, MIRROR GRADE,
FINE ANNEALED.
COATING: NONE, NOT REQUIRED.

SCD1451-01A

CONFIGURATION: PLATE, PLANE-PARALLEL
LENGTH: 46.00mm +/- 0.05mm
WIDTH: 30.04mm +/- 0.05mm
THICKNESS: 8.00mm +/- 0.10mm
PARALLELISM: NOT SPECIFIED.
EDGE BEVELS: 0.50mm MAXIMUM FACE WIDTH, ALL EDGES.
SURFACE FIGURE: 2 FRINGES MAXIMUM, POLISHED FACE.
SURFACE QUALITY: 40-20 PER MIL-O-13830, POLISHED
FACE, BACK FACE FINE GROUND.
MATERIAL TYPE/QUALITY: PYREX GLASS, MIRROR GRADE,
FINE ANNEALED.
COATING: NONE, NOT REQUIRED.

SCD1594-01A

CONFIGURATION: DISC, TAPERED STEP, PLANE-PARALLEL
MAJOR DIAMETER:2.065"+.000"/-.005"
MINOR DIAMETER: 1.650"+.000"/-.010" @ TOP OF TAPER
MAJOR DIAMETER THICKNESS:0.100"+/-.015"
MINOR DIAMETER HEIGHT:0.275" REFERENCE ONLY.
OVERALL THICKNESS: 0.375"+/-.005"
PARALLELISM: NOT SPECIFIED.
EDGE BEVEL: 0.020"+/-.015" X 45deg, 2 PLACES
(MAJOR DIAMETER EDGES ONLY)
MINOR DIAMETER TAPER ANGLE:10deg +0.0deg /-2.0deg
INSIDE RADIUS (@ TAPER INTERSECTION):0.010"/0.015"
EDGE RADIUS (@ MINOR DIA.FACE): 0.030"+/-.005"
FLATNESS: 8 FRINGES MAXIMUM, 2 FACES.
SURFACE QUALITY: 20-10 PER MIL-O-13830, 2 FACES.
60-40 PER MIL-0-13830,EDGE RADIUS
ALL OTHER SURACES FINE GROUND.
MATERIAL TYPE/QUALITY: PYREX, GRADE A, FINE ANNEAL
COATING: NONE, NOT REQUIRED.

SCD2755-02A

DIAMETER: 0.500"+.000"/-.005"
THICKNESS: 0.040"+/-.002"
PARALLELISM: 3 ARC MINUTES MAXIMUM.
FLATNESS: 10 WAVES/INCH MAXIMUM @ 633um, 2 FACES.
SURFACE FINISH: 80-50 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: PYREX, GRADE A,
FINE ANNEALED.