SAPPHIRE LENSES

SCD2704-02A

MADE FROM 10.0 mm DIAMETER SAPPHIRE BALL





SCD2922-01A

DIAMETER: 40.00mm +/- 0.10mm
CENTER THICKNESS: 10.00mm +/- 0.05mm
OVERALL THICKNESS: 13.50mm +/- 0.05mm (TO ANNULUS)
SURFACE "1" CONVEX RADIUS: 67.00mm +/- 0.10mm
SURFACE "2" CONCAVE RADIUS: 51.00mm +/- 0.10mm
SPHERICAL SURFACE POWER: CONTROLLED BY RADIUS
(OVER C.A.) TOLERANCE, 2 PLACES
SPHERICAL SURFACE IRREG: 2 FRINGES MAXIMUM AT
(OVER C.A.) 0.633um, 2 FACES.
CLEAR APERTURE: CENTRAL 35.00mm MINIMUM DIAMETER,
2 FACES.
CENTERING ERROR: 0.03mm MAXIMUM T.I.R.
EDGE BEVEL: LIGHT PROTECTIVE BEVEL, 2 PLACES.
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001).
COATING: BROADBAND ANTIREFLECTIVE COATED FOR
MAXIMUM TRANSMISSION FROM 1.0 MICRONS TO
5.0 MICRONS, APPLIED TO BOTH FACES.

SCD2923-01A

DIAMETER: 30.00mm +/- 0.10mm
CENTER THICKNESS: 25.00mm +/- 0.05mm
OVERALL THICKNESS: 26.00mm +/- 0.05mm (TO ANNULUS)
SURFACE "1" CONVEX RADIUS: 113.00mm +/- 0.10mm
SURFACE "2" CONCAVE RADIUS: 77.00mm +/- 0.10mm
SPHERICAL SURFACE POWER: CONTROLLED BY RADIUS
(OVER C.A.) TOLERANCE, 2 PLACES
SPHERICAL SURFACE IRREG: 2 FRINGES MAXIMUM AT
(OVER C.A.) 0.633um, 2 FACES.
CLEAR APERTURE: CENTRAL 22.00mm MINIMUM DIAMETER,
2 FACES.
CENTERING ERROR: 0.03mm MAXIMUM T.I.R.
EDGE BEVEL: LIGHT PROTECTIVE BEVEL, 2 PLACES.
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001).
COATING: BROADBAND ANTIREFLECTIVE COATED FOR
MAXIMUM TRANSMISSION FROM 1.0 MICRONS TO
5.0 MICRONS, APPLIED TO BOTH FACES.

SCD3176-02A

CONFIGURATION: DISC, STEPPED, PLANO/CONCAVE
MAJOR DIAMETER: 0.920"+/-.005"
MINOR DIAMETER: 0.800"+/-.002" AT BASE OF 10deg
MINOR DIAMETER TAPER: 10 DEGREES +/- 1/4 DEGREE.
OVERALL THICKNESS: 0.165"+/-.005"
MAJOR DIAMETER THICKNESS: 0.100"+/-.005"
CENTER THICKNESS: 0.040"+/-.005"
EDGE BEVELS: MAJ.DIA.TOP: 0.015"+/-.005" X 45deg.
MAJ.DIA.BOT: 0.015"+/-.005" X 52.5deg
MINOR DIA: 0.0125"+/-.0025" X
CONCAVE RADIUS: 0.600"+/-.005"
CONCAVE RADIUS LAND DIA.FACE: 0.740"+/-.005"
CONCAVE ANNULAR RING/FLAT: 0.002"/0.005"WIDE
SURFACE FINISH: OD AND BOTTOM BEVEL: POLISHED.
FACES: OPTICALLY POLISHED 20-10.
ALL OTHER SURFACES: FINE GROUND.
MATERIAL TYPE/QUALITY: SAPPHIRE, HEMLUX or EQUIV.
CRYSTALLOGRAPHIC ORIENTATION: (0001).
COATING: NONE, NOT REQUIRED.

SCD3228-02A

CONFIGURATION: DISC, PLANO-CONCAVE
DIAMETER: 0.500"+.000"/-.005"
EDGE THICKNESS: 0.161"+/-.005"
WEDGE ERROR: 0.0005" MAXIMUM T.I.R.
FOCAL LENGTH: - 0.9543" NOMINAL AT 633nm.
SPHERICAL RADIUS: 0.7539"+/-.0038"
SURFACE ACCURACY: 1 WAVE MAXIMUM @ 0.633um,
2 FACES.
SURFACE QUALITY: 40-20 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGAPHIC ORIENTATION: (0001).
COATING: NONE, NOT REQUIRED.

SCD3251-01A

DIAMETER: 68.000mm + 0.000mm /- 0.025mm
CENTER THICKNESS: 5.00mm +/- 0.05mm
OVERALL THICKNESS: 7.669mm REF.ONLY
CONCAVE SAG DEPTH: 2.669mm +/- 0.025mm
CONVEX SPHERICAL RADIUS: 383.021mm +/- 0.958mm
CONCAVE SPHERICAL RADIUS: 194.398mm +/- 0.486mm
SPHERICAL SURFACE IRREG: 2.0 FRINGES MAXIMUM AT
633nm, BOTH FACES.
SPHERICAL SURFACE RMS: 0.06 FRINGE MAXIMUM @ 633nm
CENTERING ERROR: 0.013mm MAXIMUM T.I.R.
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
SURFACE ROUGHNESS: 120 ANGSTROMS RMS MAXIMUM.
EDGE BEVELS: 0.50mm +/- 0.10mm FACE WIDTH X 45deg.
CLEAR APERTURE: CONVEX FACE: 64.20mm DIAMETER.
CONCAVE FACE: 62.70mm DIAMETER.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001)
COATING: BROADBAND ANTIREFLECTIVE COATED PER
NOTE 6 ON DRAWING.

SCD3252-01A

DIAMETER: 21.000mm + 0.000mm /- 0.025mm
CENTER THICKNESS: 2.00mm +/- 0.05mm
OVERALL THICKNESS: 2.648mm REF.ONLY
CONCAVE SAG DEPTH: 0.648mm +/- 0.025mm
CONVEX SPHERICAL RADIUS: 112.729mm +/- 0.564mm
CONCAVE SPHERICAL RADIUS: 70.012mm +/- 0.350mm
SPHERICAL SURFACE IRREG: 2.0 FRINGES MAXIMUM AT
633nm, BOTH FACES.
SPHERICAL SURFACE RMS: 0.06 FRINGE MAXIMUM @ 633nm
CENTERING ERROR: 0.013mm MAXIMUM T.I.R.
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
SURFACE ROUGHNESS: 120 ANGSTROMS RMS MAXIMUM.
EDGE BEVELS: 0.50mm +/- 0.10mm FACE WIDTH X 45deg.
CLEAR APERTURE: CONVEX FACE: 18.00mm DIAMETER.
CONCAVE FACE: 18.00mm DIAMETER.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001)
COATING: BROADBAND ANTIREFLECTIVE COATED PER
NOTE 6 ON DRAWING.

SCD3267-02A

DIAMETER: 66.000mm + 0.000mm /- 0.050mm
CENTER THICKNESS: 5.00mm +/- 0.125mm
OVERALL THICKNESS: 10.20mm REF.ONLY
CONCAVE SAG DEPTH: 5.200mm +/- 0.025mm
CONVEX SPHERICAL RADIUS: 100.000mm +/- 0.500mm
CONCAVE SPHERICAL RADIUS: 95.000mm +/- 0.475mm
SPHERICAL SURFACE IRREG: 5.0 FRINGES MAXIMUM AT
633nm, BOTH FACES.
SPHERICAL SURFACE RMS: NOT SPECIFIED.
CENTERING ERROR: 0.025mm MAXIMUM T.I.R.
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
SURFACE ROUGHNESS: NOT SPECIFIED.
EDGE BEVELS: 0.36mm +/- 0.05mm FACE WIDTH X 45deg.
CLEAR APERTURE: CONVEX FACE: 64.00mm DIAMETER.
CONCAVE FACE: 60.00mm DIAMETER.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001)
COATING: NONE, NOT REQUIRED.

SCD3306-02A

CONFIGURATION: DISC, Bi-CONVEX
DIAMETER: 10.000mm + 0.000mm /- 0.025mm
CENTER THICKNESS: 4.00mm +/- 0.10mm
EDGE THICKNESS: 2.15mm REF.ONLY
CONVEX RADIUS (1): 14.00mm +/- 12 FRINGES
CONVEX RADIUS (2): 14.00mm +/- 12 FRINGES
SPHERICAL SURFACE IRREG: 1.5 FRINGES MAXIMUM AT
633nm, BOTH FACES.
CENTERING ERROR: 2 ARC MINUTES MAXIMUM
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
EDGE BEVELS: 0.25mm MAXIMUM FACE WIDTH X 45deg.
CLEAR APERTURE: CENTRAL 9.00mm MINIMUM DIAMETER
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001)
COATING: NONE, NOT REQUIRED.
MARKING: NONE, NOT REQUIRED.
NOTE: PLEASE NOTE EXCEPTIONS TO DRAWING.

SCD3307-02A

CONFIGURATION: DISC, Bi-CONVEX
DIAMETER: 10.000mm + 0.000mm /- 0.025mm
CENTER THICKNESS: 3.25mm +/- 0.10mm
EDGE THICKNESS: 2.45mm REF.ONLY
CONVEX RADIUS (1): 75.00mm +/- 12 FRINGES
CONVEX RADIUS (2): 20.00mm +/- 12 FRINGES
SPHERICAL SURFACE IRREG: 1.5 FRINGES MAXIMUM AT
633nm, BOTH FACES.
CENTERING ERROR: 2 ARC MINUTES MAXIMUM
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
EDGE BEVELS: 0.25mm MAXIMUM FACE WIDTH X 45deg.
CLEAR APERTURE: CENTRAL 9.00mm MINIMUM DIAMETER
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001)
COATING: NONE, NOT REQUIRED.
MARKING: ARROW ON OD SURFACE POINTING TOWARDS
75.00mm RADIUS FACE.
NOTE: PLEASE NOTE EXCEPTIONS TO DRAWING

SCD3308-02A

CONFIGURATION: DISC, Bi-CONVEX
DIAMETER: 10.00mm + 0.000mm /- 0.025mm
CENTER THICKNESS: 2.75mm +/- 0.10mm
EDGE THICKNESS: 2.245mm REF.ONLY
CONVEX RADIUS (1): 25.00mm +/- 12 FRINGES
PLANO SURFACE (2): +/- 12 FRINGES
SPHERICAL SURFACE IRREG: 1.5 FRINGES MAXIMUM AT
633nm, BOTH FACES.
CENTERING ERROR: 2 ARC MINUTES MAXIMUM
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
EDGE BEVELS: 0.25mm MAXIMUM FACE WIDTH X 45deg.
CLEAR APERTURE: CENTRAL 9.00mm MINIMUM DIAMETER
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001)
COATING: NONE, NOT REQUIRED.
MARKING: ARROW ON OD SURFACE POINTING TOWARDS
PLANO FACE.
NOTE: PLEASE NOTE EXCEPTIONS TO DRAWING

SCD3368-01A

CONFIGURATION: DISC, PLANO-CONCAVE
DIAMETER: 1.060"+.000"/-.001"
CENTER THICKNESS: 0.100"+/-.001"
EDGE THICKNESS: 0.130" REF.ONLY
CONCAVE SAG DEPTH: 0.030"+/-.001"
CENTERING ERROR: 0.0002" MAXIMUM T.I.R.
EDGE BEVEL: 0.006"+/-.004" FACE WIDTH, 2 PLACES.
CONCAVE SPHERICAL RADIUS: 4.4115"+/-.0441"
CONCAVE SURFACE IRREG: 1 FRINGE MAXIMUM @ 633nm.
PLANO SURFACE ACCURACY: POWER: 2 FRINGES MAXIMUM.
(@ 633nm) IRREG: 1 FRINGE MAXIMUM.
SURFACE QUALITY: 80-50 PER MIL-PRF-13830, 2 FACES.
SURFACE ROUGHNESS: 127 ANGSTROMS RMS MAXIMUM.
CLEAR APERTURES: CONCAVE FACE: 0.930" MIMIMUM.
PLANO FACE: 0.890" MINIMUM.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001) +/- 2 Deg.
COATING: QUAD-BAND ANTIREFLECTIVE COATING PER
DRAWING 6621013 NOTES 9 & 10.

SCD3637-02A

CONFIGURATION: DISC, PLANO-CONVEX
DIAMETER: 0.206"+/-.002"
CENTER THICKNESS: 0.0937" REF.
EDGE THICKNESS: 0.078"+/-.002"
CENTRATION ERROR: NOT SPECIFIED.
EDGE BEVEL: LIGHT PROTECTIVE BEVEL/PLANO EDGE ONLY
FOCAL LENGTH: 0.452" REF.
SPHERICAL RADIUS: 0.3505"+/-.0025" (CONVEX)
SURFACE ACCURACY: 5 FRINGES MAXIMUM, 2 FACES.
SURFACE QUALITY: 80-50 PER MIL-PRF-13830, 2 FACES.
CLEAR APERTURE: NOT SPECIFIED.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001)
COATING: NONE, NOT REQUIRED.

SCD3706-02A

CONFIGURATION: DISC, CONVEX/CONVEX
DIAMETER: 8.40mm + 0.00mm /- 0.025mm
CENTER THICKNESS: 3.60mm +/- 0.05mm
EDGE BEVELS: 0.20mm MAXIMUM FACE WIDTH, 2 PLACES.
CENTERING ERROR: 2 ARC MINUTES MAXIMUM
SPHERICAL RADIUS (1): 15.00mm +/- 4 FRINGES
SPHERICAL RADIUS (2): 15.00mm +/- 4 FRINGES
SURFACE ACCURACY: 1 FRINGE MAXIMUM @ 633nm OVER
CLEAR APERTURE, 2 FACES
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
CLEAR APERTURE: CENTRAL 7.00mm DIAMETER, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: c-PLANE
COATING: NONE, UNCOATED SUBSTRATE
NOTE: SEE SPECIAL OD WALL CONFIGURATION.

SCD3707-02A

CONFIGURATION: DISC, CONVEX/CONVEX
DIAMETER: 7.00mm + 0.00mm /- 0.025mm
CENTER THICKNESS: 3.00mm +/- 0.05mm
EDGE BEVELS: 0.20mm MAXIMUM FACE WIDTH, 2 PLACES.
CENTERING ERROR: 2 ARC MINUTES MAXIMUM
SPHERICAL RADIUS (1): 15.00mm +/- 4 FRINGES
SPHERICAL RADIUS (2): 30.00mm +/- 4 FRINGES
SURFACE ACCURACY: 1 FRINGE MAXIMUM @ 633nm OVER
CLEAR APERTURE, 2 FACES
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
CLEAR APERTURE: CENTRAL 6.00mm DIAMETER, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: c-PLANE
COATING: NONE, UNCOATED SUBSTRATE
NOTE: SEE SPECIAL OD WALL CONFIGURATION.

SCD3708-02A

CONFIGURATION: DISC, CONVEX/CONVEX
DIAMETER: 14.00mm + 0.00mm /- 0.025mm
CENTER THICKNESS: 3.25mm +/- 0.05mm
EDGE BEVELS: 0.20mm MAXIMUM FACE WIDTH, 2 PLACES.
CENTERING ERROR: 2 ARC MINUTES MAXIMUM
SPHERICAL RADIUS (1): 66.50mm +/- 4 FRINGES
SPHERICAL RADIUS (2): 66.50mm +/- 4 FRINGES
SURFACE ACCURACY: 1 FRINGE MAXIMUM @ 633nm OVER
CLEAR APERTURE, 2 FACES
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
CLEAR APERTURE: CENTRAL 12.50mm DIAMETER, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: c-PLANE
COATING: NONE, UNCOATED SUBSTRATE
NOTE: SEE SPECIAL OD WALL CONFIGURATION.

SCD3725-02A

CONFIGURATION: DISC, CONVEX/CONVEX
DIAMETER: 10.50mm + 0.00mm /- 0.025mm
CENTER THICKNESS: 2.70mm +/- 0.05mm
EDGE BEVELS: 0.20mm MAXIMUM FACE WIDTH, 2 PLACES.
CENTERING ERROR: 2 ARC MINUTES MAXIMUM
SPHERICAL RADIUS (1): 225.00mm +/- 4 FRINGES
SPHERICAL RADIUS (2): 225.00mm +/- 4 FRINGES
SURFACE ACCURACY: 1 FRINGE MAXIMUM @ 633nm OVER
CLEAR APERTURE, 2 FACES
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
CLEAR APERTURE: CENTRAL 9.00mm DIAMETER, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: c-PLANE
COATING: NONE, UNCOATED SUBSTRATE
NOTE: SEE SPECIAL OD WALL CONFIGURATION.