SCD1811-01A
$90.00
SAPPHIRE PLATE WITH SLOT
0.752″ X 0.280″ X 0.080″THK.
2 in stock
SKU: SCD1811-01A
Category: SAPPHIRE PLATE
CONFIGURATION: RECTANGULAR PLATE WITH SLOT
LENGTH: 0.752″+/-.002″
WIDTH: 0.280″+/-.002″
THICKNESS: 0.080″+/-.002″
SLOT WIDTH: 0.612″+/-.002″
SLOT DEPTH: 0.040″+/-.002″
STEP WIDTH (ONE SIDE): 0.070″+/-.002″
SURFACE FINISH: ALL SURFACES FINE GROUND.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: RANDOM
| Weight | 0.1 lbs |
|---|
Related products
SCD1514-01A
LENGTH X WIDTH: 10.00mm +/- 0.10mmTHICKNESS: 0.25mm +/- 0.05mm
PARALLELISM: NOT SPECIFIED.
FLATNESS: NOT SPECIFIED.
THRU-HOLE DIAMETER: 0.75mm +/- 0.10mm, 4 PLACES.
THRU-HOLE LOCATION: EACH HOLE LOCATED 1.50mm
+/- 0.10mm FROM EACH EDGE.
(1 HOLE IN EACH CORNER)
SURFACE FINISH: 80-50 PER MIL-O-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE
CRYSTALLOGRAPHIC ORIENTATION: RANDOM.
A5A013901040
L & W TOLERANCE: +/-.005"THICKNESS: 0.040"+/-.001"
PARALLELISM: 0.001"/INCH MAXIMUM T.I.R.
SURFACE FINISH: ALL SURFACES FINE GROUND.
MATERIAL QUALITY: OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: RANDOM
SCD1551-01A
L X W: 32.00mm X 32.00mm + 0.10mm - 0.00mmTHICKNESS: 3.18mm + 0.20mm /- 0.00mm
PARALLELISM: 3 ARC MINUTES MAXIMUM.
FLATNESS: 1 WAVE/INCH MAXIMUM WITHIN CLEAR
APERTURE, 2 FACES.
SURFACE QUALITY: 40-20 PER MIL-O-13830, 2 FACES.
CLEAR APERTURE: CENTRAL 30.00mm DIAMETER.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: RANDOM.
COATING: ANTIREFLECTIVE COATED FOR 0.25% MAXIMUM
REFLECTANCE PER SURFACE FROM 800nm TO
820nm WITH A NORMAL INCIDENCE ANGLE,
APPLIED TO BOTH FACES.
SCD2374-02A
CONFIGURATION: PLATE, PLANE-PARALLEL, 2 THRU-HOLESLENGTH: 14.00mm +/- 0.10mm
WIDTH: 12.00mm +/- 0.10mm
THICKNESS: 1.00mm +/- 0.05mm
PARALLELISM: NOT SPECIFIED.
HOLE DIAMETER: 2.20mm +/- 0.10mm, 2 PLACES.
HOLE LOCATION: SEE SKETCH.
EDGE BEVEL: LIGHT PROTECTIVE BEVEL, ALL EDGES.
FLATNESS: NOT SPECIFIED.
SURFACE QUALITY: 80-50 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: RANDOM.
SCD3190-02A
CONFIGURATION: PLATE, PLANE-PARALLEL, W/ TAPEREDGROOVE & 2 THRU-HOLES.
LENGTH: 0.850"+/-.004"
WIDTH: 0.750"+/-.004"
THICKNESS: 0.0315"+/-.0015"
PARALLELISM: 0.0005" MAXIMUM T.I.R.
TAPERED GROOVE: 1.470" CYLINDRICAL RADIUS TAPERED
AT 1.062 DEGREES TO FORM A 0.372"
WIDTH AT THE STARTING EDGE AND
ENDS AT A DISTANCE OF 0.2126" FROM
THE OTHER OPPOSING EDGE.
THRU-HOLES: 0.1189"+/-.0019" (2 PLACES)
THRU-HOLE LOCATION: SPACED 0.372" APART (0.186"
FROM C/L) AND 0.6839" FROM
LEADING EDGE.
LEADING EDGE TAPER: 2.2544 DEGREES X 0.100"WIDTH
SURFACE FINISH: TOP SURFACE POLSIHED, BACK SURFACE
FINE GROUND.
MATERIAL TYPE/QUALITY: SAPPHIRE, NON-OPTICAL.
SCD1558-01A
LENGTH: 0.6327 +/-.002"WIDTH: 0.375 +/-.002"
THICKNESS: 0.040 +/-.001"
RADIUS, ONE END ONLY: 0.500"
SLOT WIDTH, RADIUS END: 0.010/0.020"
SLOT DEPTH, RADIUS END: 0.003/0.005"
SLOT LOCATED ON CENTER LINE OF LENGTH OF PLATE,
FULL RADIUS ACCEPTABLE AT BOTTOM OF SLOT.
SURFACE FINISH: ALL SURFACES FINE GROUND.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE
CRYSTALLOGRAPHIC ORIENTATION: RANDOM.
A5A910603100
L X W TOLERANCE: +/-.002"THICKNESS: 0.100"+/-.002"
PARALLELISM: 3 ARC MINUTES MAXIMUM.
FLATNESS: UNCONTROLLED.
SURFACE FINISH: 80-50 PER MIL-PRF-13830, 1 FACE.
FINE GROUND OTHER FACE.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: RANDOM.
SCD2125-02A
CONFIGURATION: PLATE, PLANE-PARALLELLENGTH: 0.447"+/-.005"
WIDTH: 0.407"+/-.005"
THICKNESS: 0.100"+/-.005"
PARALLELISM: 30 ARC SECONDS MAXIMUM.
SURFACE ACCURACY: NOT SPECIFIED
SURFACE QUALITY: 60/40 PER MIL-O-13830, 2 FACES
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: RANDOM
COATING: NONE, NOT REQUIRED.