SCD2188-02A
$600.00
SAPPHIRE LENS PL/CC W/CTR.HOLE
38.00mm DIA. X 1.00mm EDGE THK
2 in stock
SKU: SCD2188-02A
Categories: SAPPHIRE LENS, Sapphire Lenses
CONFIGURATION: DISC, CENTER THRU-HOLE, PL/CC
OUTER DIAMETER: 38.00mm + 0.00mm /- 0.10mm
INNER DIAMETER: 2.00mm +/- 0.10mm
EDGE THICKNESS: 1.00mm +/- 0.05mm
ANNULAR RING DIAMETER: 34.00mm +/- 0.20mm
(CONCAVE FACE)
SPHERICAL RADIUS: 300.00mm +/- 1.50mm CONCAVE
SURFACE ACCURACY: NOT SPECIFIED
SURFACE QUALITY: 60-40 PER MIL-O-13830, 3 FACES.
( PLANO, CONCAVE, AND ANNULAR
RING FACES ) ALL OTHERS GROUND.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001)
COATING: NONE, NOT REQUIRED.
| Weight | 0.1 lbs |
|---|
Related products
SCD1983-01A
CONFIGURATION: DISC, Bi-CONCAVEDIAMETER: 0.500"+.000"/-.005"
EDGE THICKNESS: 2.00mm +/- 0.04mm
CENTERING ERROR: 3.0 ARC MINUTES MAXIMUM
EDGE BEVELS: 0.005" NOMINAL X 45deg, 2 PLACES
RADIUS OF CURVATURE (SURFACE 1): 177.80mm CONCAVE
+/- 1.78mm
RADIUS OF CURVATURE (SURFACE 2): 177.80mm CONCAVE
+/- 1.78mm
SURFACE ACCURACY: 1/10 WAVE RMS MAXIMUM, 2 FACES.
SURFACE QUALITY: 40-20 PER MIL-O-13830, 2 FACES.
SURFACE ROUGHNESS: 10 ANGSTROMS RMS MAXIMUM,
2 FACES.
MATERIAL TYPE QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001)
COATING: SEE SPECIFICATION SCD1983 Rev.A
SCD3307-02A
CONFIGURATION: DISC, Bi-CONVEXDIAMETER: 10.000mm + 0.000mm /- 0.025mm
CENTER THICKNESS: 3.25mm +/- 0.10mm
EDGE THICKNESS: 2.45mm REF.ONLY
CONVEX RADIUS (1): 75.00mm +/- 12 FRINGES
CONVEX RADIUS (2): 20.00mm +/- 12 FRINGES
SPHERICAL SURFACE IRREG: 1.5 FRINGES MAXIMUM AT
633nm, BOTH FACES.
CENTERING ERROR: 2 ARC MINUTES MAXIMUM
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
EDGE BEVELS: 0.25mm MAXIMUM FACE WIDTH X 45deg.
CLEAR APERTURE: CENTRAL 9.00mm MINIMUM DIAMETER
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001)
COATING: NONE, NOT REQUIRED.
MARKING: ARROW ON OD SURFACE POINTING TOWARDS
75.00mm RADIUS FACE.
NOTE: PLEASE NOTE EXCEPTIONS TO DRAWING
SCD2446-02A
CONFIGURATION: DISC, CONCAVE-CONVEXDIAMETER: 25.00mm + 0.00mm /- 0.10mm
CENTER THICKNESS: 5.00mm +/- 0.20mm
CENTERING TOLERANCE: 0.025mm MAXIMUM T.I.R.
SURFACE ACCURACY: NOT SPECIFIED.
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
FOCAL LENGTH: 38.00mm +/- 0.50%
CONVEX RADIUS: 23.175mm +/- 0.12mm
CONCAVE RADIUS: 100.00mm +/- 0.50mm
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001)
COATING: NONE, NOT REQUIRED.
SCD3306-02A
CONFIGURATION: DISC, Bi-CONVEXDIAMETER: 10.000mm + 0.000mm /- 0.025mm
CENTER THICKNESS: 4.00mm +/- 0.10mm
EDGE THICKNESS: 2.15mm REF.ONLY
CONVEX RADIUS (1): 14.00mm +/- 12 FRINGES
CONVEX RADIUS (2): 14.00mm +/- 12 FRINGES
SPHERICAL SURFACE IRREG: 1.5 FRINGES MAXIMUM AT
633nm, BOTH FACES.
CENTERING ERROR: 2 ARC MINUTES MAXIMUM
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
EDGE BEVELS: 0.25mm MAXIMUM FACE WIDTH X 45deg.
CLEAR APERTURE: CENTRAL 9.00mm MINIMUM DIAMETER
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001)
COATING: NONE, NOT REQUIRED.
MARKING: NONE, NOT REQUIRED.
NOTE: PLEASE NOTE EXCEPTIONS TO DRAWING.
SCD3176-02A
CONFIGURATION: DISC, STEPPED, PLANO/CONCAVEMAJOR DIAMETER: 0.920"+/-.005"
MINOR DIAMETER: 0.800"+/-.002" AT BASE OF 10deg
MINOR DIAMETER TAPER: 10 DEGREES +/- 1/4 DEGREE.
OVERALL THICKNESS: 0.165"+/-.005"
MAJOR DIAMETER THICKNESS: 0.100"+/-.005"
CENTER THICKNESS: 0.040"+/-.005"
EDGE BEVELS: MAJ.DIA.TOP: 0.015"+/-.005" X 45deg.
MAJ.DIA.BOT: 0.015"+/-.005" X 52.5deg
MINOR DIA: 0.0125"+/-.0025" X
CONCAVE RADIUS: 0.600"+/-.005"
CONCAVE RADIUS LAND DIA.FACE: 0.740"+/-.005"
CONCAVE ANNULAR RING/FLAT: 0.002"/0.005"WIDE
SURFACE FINISH: OD AND BOTTOM BEVEL: POLISHED.
FACES: OPTICALLY POLISHED 20-10.
ALL OTHER SURFACES: FINE GROUND.
MATERIAL TYPE/QUALITY: SAPPHIRE, HEMLUX or EQUIV.
CRYSTALLOGRAPHIC ORIENTATION: (0001).
COATING: NONE, NOT REQUIRED.
SCD3706-02A
CONFIGURATION: DISC, CONVEX/CONVEXDIAMETER: 8.40mm + 0.00mm /- 0.025mm
CENTER THICKNESS: 3.60mm +/- 0.05mm
EDGE BEVELS: 0.20mm MAXIMUM FACE WIDTH, 2 PLACES.
CENTERING ERROR: 2 ARC MINUTES MAXIMUM
SPHERICAL RADIUS (1): 15.00mm +/- 4 FRINGES
SPHERICAL RADIUS (2): 15.00mm +/- 4 FRINGES
SURFACE ACCURACY: 1 FRINGE MAXIMUM @ 633nm OVER
CLEAR APERTURE, 2 FACES
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
CLEAR APERTURE: CENTRAL 7.00mm DIAMETER, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: c-PLANE
COATING: NONE, UNCOATED SUBSTRATE
NOTE: SEE SPECIAL OD WALL CONFIGURATION.
SCD3725-02A
CONFIGURATION: DISC, CONVEX/CONVEXDIAMETER: 10.50mm + 0.00mm /- 0.025mm
CENTER THICKNESS: 2.70mm +/- 0.05mm
EDGE BEVELS: 0.20mm MAXIMUM FACE WIDTH, 2 PLACES.
CENTERING ERROR: 2 ARC MINUTES MAXIMUM
SPHERICAL RADIUS (1): 225.00mm +/- 4 FRINGES
SPHERICAL RADIUS (2): 225.00mm +/- 4 FRINGES
SURFACE ACCURACY: 1 FRINGE MAXIMUM @ 633nm OVER
CLEAR APERTURE, 2 FACES
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
CLEAR APERTURE: CENTRAL 9.00mm DIAMETER, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: c-PLANE
COATING: NONE, UNCOATED SUBSTRATE
NOTE: SEE SPECIAL OD WALL CONFIGURATION.
SCD1982-01A
CONFIGURATION: DISC, PLANO-CONVEXDIAMETER: 0.500"+.000"/-.005"
EDGE THICKNESS: 2.00mm +/- 0.04mm
CENTER THICKNESS: 2.050mm REF.
CENTERING ERROR: 3.0 ARC MINUTES MAXIMUM.
RADIUS OF CURVATURE (SURFACE 1): 400.80mm CONCAVE
+/- 8.0mm
RADIUS OF CURVATURE (SURFACE 2): INFINITE (PLANO)
TOL.NOT SPECIFIED
SURFACE ACCURACY: 1/10 WAVE RMS MAXIMUM, 2 FACES.
SURFACE QUALITY: 40-20 PER MIL-O-13830, 2 FACES.
SURFACE ROUGHNESS: 10 ANGSTROMS RMS MAXIMUM,
2 FACES.
EDGE BEVELS: 0.005" NOMINAL X 45deg, 2 PLACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001)
COATING: SEE SPECIFICATION SCD1982 Rev.A