SCD2374-02A

SCD2125-02A

CONFIGURATION: PLATE, PLANE-PARALLEL
LENGTH: 0.447"+/-.005"
WIDTH: 0.407"+/-.005"
THICKNESS: 0.100"+/-.005"
PARALLELISM: 30 ARC SECONDS MAXIMUM.
SURFACE ACCURACY: NOT SPECIFIED
SURFACE QUALITY: 60/40 PER MIL-O-13830, 2 FACES
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: RANDOM
COATING: NONE, NOT REQUIRED.

SCD2756-02A

CONFIGURATION: SQUARE, PLANE-PARALLEL
L X W: 7.82mm + 0.00mm /- 0.10mm (2 PLACES)
THICKNESS: 2.00mm +/- 0.12mm
PARALLELISM: 1 ARC MINUTE MAXIMUM.
EDGE BEVELS: LIGHT PROTECTIVE BEVEL, ALL EDGES.
CLEAR APERTURE: CENTRAL 90% OF FACES.
SURFACE ACCURACY: 1/4 WAVE MAXIMUM @ 633um,
2 FACES.
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001)
COATING: NONE, UNCOATED SUBSTRATE.

SCD3752-02B

Configuration: Rectangular Plate, Plane-Parallel Faces Overall Length: 280.00mm +/- 0.10mm Width: 11.60mm +/- 0.05mm Thickness: 6.00mm +/- 0.05mm Parallelism: Controlled by Thickness Tolerance Surface Roughness: < 5 Angstroms RMS (Critical Face) Surface Finish: 20-10 Per MIL-PRF-13830 on the Critical Face Inspection Polish on The End Faces and Non-critical Face Edge Chips: No Chips Allowed Along the Critical Polished Face Edges Edge Bevels: 0.50mm Face Width x 45 Degrees, 4 Edges as Shown on Drawing Material Type / Quality: Sapphire, Optical Grade Crystallographic Orientation: c-Plane Coating: None, Not Required

ANAE10706020

LENGTH X WIDTH: 0.750" X 0.6875" +/-.002"
THICKNESS: 0.020"+/-.002"
PARALLELISM: NOT SPECIFIED.
FLATNESS: NOT SPECIFIED.
SURFACE FINISH: 80-50 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE
CRYSTALLOGRAPHIC ORIENTATION: R-PLANE.
COATING: NONE, NOT REQUIRED.

SCD3190-02A

CONFIGURATION: PLATE, PLANE-PARALLEL, W/ TAPERED
GROOVE & 2 THRU-HOLES.
LENGTH: 0.850"+/-.004"
WIDTH: 0.750"+/-.004"
THICKNESS: 0.0315"+/-.0015"
PARALLELISM: 0.0005" MAXIMUM T.I.R.
TAPERED GROOVE: 1.470" CYLINDRICAL RADIUS TAPERED
AT 1.062 DEGREES TO FORM A 0.372"
WIDTH AT THE STARTING EDGE AND
ENDS AT A DISTANCE OF 0.2126" FROM
THE OTHER OPPOSING EDGE.
THRU-HOLES: 0.1189"+/-.0019" (2 PLACES)
THRU-HOLE LOCATION: SPACED 0.372" APART (0.186"
FROM C/L) AND 0.6839" FROM
LEADING EDGE.
LEADING EDGE TAPER: 2.2544 DEGREES X 0.100"WIDTH
SURFACE FINISH: TOP SURFACE POLSIHED, BACK SURFACE
FINE GROUND.
MATERIAL TYPE/QUALITY: SAPPHIRE, NON-OPTICAL.

A5A910603100

L X W TOLERANCE: +/-.002"
THICKNESS: 0.100"+/-.002"
PARALLELISM: 3 ARC MINUTES MAXIMUM.
FLATNESS: UNCONTROLLED.
SURFACE FINISH: 80-50 PER MIL-PRF-13830, 1 FACE.
FINE GROUND OTHER FACE.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: RANDOM.

SCD0461-01A

LENGTH X WIDTH TOLERANCE: +/-.001"
THICKNESS TOLERANCE: +/-.001"
PARALLELISM: 0.0005" MAXIMUM T.I.R.
FLATNESS: 10 WAVES/INCH MAXIMUM, 2 FACES.
SURFACE FINISH: 1 MICROINCH OR BETTER, 2 FACES.
MATERIAL QUALITY: OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: C-AXIS IN THE PLANE
OF THE FACES, 90deg NOMINAL.

SCD3765-02B

Configuration: Rectangular Plate, Stepped Face Overall Length: 280.00mm +/- 0.10mm Overall Width: 46.00mm +/- 0.25mm Stepped Width: 35.00mm +/- 0.05mm Step Height: 3.00mm+/- 0.05mm (2 Places) Overall Thickness: 6.00mm +/- 0.10mm Ledge Thickness: 3.00mm Reference Only (2 Places) Parallelism: Controlled by Thickness Tolerances Surface Roughness: < 5 Angstroms RMS on the Critical Face Surface Finish: 20-10 Per MIL-PRF-13830 on the Critical Face Inspection Polish on the End Faces and the Non-Critical Face Edge Chips: No Chips Allowed Along the Critical Face Edges With No Bevels Allowed Edge Bevels: 0.50mm Maximum Face Width x 45 Degrees, 6 Edges Where Shown on Drawing Material Type / Quality: Sapphire, Optical Grade Crystallographic Orientation: c-Plane Coating: None, Not Required