SCD2383-01A
$15.00
BK-7 WINDOW RECT. COATED
2.520″ X 0.570″ X 0.075″THK.
6 in stock
SKU: SCD2383-01A
Category: BK-7 WINDOW
CONFIGURATION: PLATE, PLANE-PARALLEL
LENGTH: 2.520″+/-.005″
WIDTH: 0.570″+/-.005″
THICKNESS: 0.075″+/-.015″
PARALLELISM: 5 ARC MINUTES MAXIMUM
CORNER BEVEL: 0.060″+/-.005″ X 45deg, 4 PLACES.
EDGE BEVEL: LIGHT PROTECTIVE BEVEL X 45deg,
8 PLACES.
SURFACE ACCURACY: 4 WAVES MAXIMUM AT 633nm,
2 FACES.
SURFACE QUALITY: 40-20 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: BK-7 GLASS, GRADE A, FINE
ANNEALED.
COATING: ANTIREFLECTIVE COATED WITH MgF2 FOR
MAXIMUM TRANSMISSION AT 670nm WITH A
NORMAL INCIDENCE ANGLE, APPLIED TO BOTH
FACES.
| Weight | 0.1 lbs |
|---|
Related products
SCD2626-05A
CONFIGURATION: DISC, PLANE-PARALLELDIAMETER: 1.000"+/-.005"
THICKNESS: 0.100"+/-.005"
PARALLELISM: 5 ARC SECONDS MAXIMUM.
EDGE BEVEL: LIGHT PROTECTIVE BEVEL, 2 PLACES.
SURFACE ACCURACY: POWER: 1 WAVE MAXIMUM, 2 FACES
(@ 633nm) IRREG: 1/4 WAVE MAXIMUM,2 FACES
TRANSMITTED WAVEFRONT ERROR: 1/10 WAVE MAXIMUM
(@ 633nm) OVER CLEAR APERTURE.
SURFACE QUALITY: E-E PER MIL-F-48616 WITHIN CLEAR
APERTURE, 2 FACES.
SURFACE ROUGHNESS: 25 ANGSTROMS RMS MAXIMUM.
CLEAR APERTURE: CENTRAL 0.750" MINIMUM DIAMETER.
MATERIAL TYPE/QUALITY: SCHOTT BK7 GLASS, GRADE A,
OR EQUIVALENT.
COATING: NONE, UNCOATED SUBSTRATE.
SCD1916-01A
DIAMETER: 12.50mm +/- 0.05mmTHICKNESS: 3.00mm +/- 0.05mm
PARALLELISM: 1 ARC MINUTE MAXIMUM.
FLATNESS: 2 WAVES MAXIMUM, 2 FACES.
SURFACE FINISH: 40-20 PER MIL-O-13830, 2 FACES.
MATERIAL TYPE/QUALITY: BK-7 GLASS, GRADE A.
COATING: ANTIREFLECTIVE COATING WITH MAGNESIUM
FLUORIDE FOR MAXIMUM TRANSMISSION AT
1.064 MICRONS, APPLIED TO 1 FACE ONLY.
SCD3206-02A
DIAMETER: 3.200"+/-.005"THICKNESS: 0.118"+/-.005"
PARALLELISM: 3 ARC MINUTES MAXIMUM
FLATNESS: NOT SPECIFIED
EDGE BEVEL: LIGHT PROTECTIVE BEVEL, 2 PLACES.
SURFACE FINISH: 60-40 PER MIL-PRF-13830, 2 FACES.
CLEAR APERTURE: CENTRAL 80% MINIMUM, 2 FACES.
MATERIAL TYPE/QUALITY: BK-7 GLASS, GRADE A, FINE
ANNEALED.
COATING: NONE, NOT REQUIRED.
SCD2693-02A
CONFIGURATION: SQUARE, PLANE-PARALLELL X W: 64.00mm +/- 0.12mm (2 PLACES)
THICKNESS: 3.00mm +/- 0.12mm
PARALLELISM: 3 ARC MINUTES MAXIMUM.
CORNER/EDGE BEVELS: LIGHT PROTECTIVE BEVEL, ALL
CORNERS AND EDGES.
SURFACE ACCURACY: NOT SPECIFIED.
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: BK-7 GLASS, GRADE A, FINE
ANNEALED.
COATING: ANTIREFLECTIVE COATED FOR MAXIMUM
TRANSMISSION FROM 1200nm TO 1800nm WITH
A NORMAL INCIDENCE ANGLE, APPLIED TO
ONE FACE ONLY.
MARKING: ARROW ON EDGE SURFACE POINTING TOWARDS
THE COATED FACE.
SCD0441-01A
MAJOR DIAMETER: 2.662"+.000"/-.010"MINOR DIAMETER: 1.100"+/-.005" TO SHARP CORNER
AT TOP OF 30 DEGREE SLOPE. (SEE PRINT)
OVERALL THICKNESS: 0.313"+/-.003"
MINOR DIAMETER HEIGHT: 0.063"+.003"/-.000"
CONCENTRICITY: NOT SPECIFIED.
RADIUS AT INTERSECT OF DIAMETERS: 0.040"+/-.010"
FLATNESS: NOT SPECIFIED.
SURFACE FINISH: 30-20 PER MIL-O-13830, 2 FACES,
80-50 ON STEP AND SLOPE.
LOCATE (6)EA 0.171" DIA.THRU HOLES ON A 1.570"BC
AS SHOWN ON PRINT
BREAK EDGES OF MAJOR DIAMETER 0.030" TYPICAL.
MATERIAL: SCHOTT BK7, GRADE A, FINE ANNEALED.
C10E10748039
DIAMETER TOLERANCE: +/-.002"THICKNESS TOLERANCE: +/-.002"
PARALLELISM: 3 ARC MINUTES MAXIMUM.
FLATNESS: 10 WAVES/INCH MAXIMUM, 2 FACES.
SURFACE FINISH: 80-50 OR BETTER, 2 FACES.
C20E00857120
DIAMETER: 0.857"+/-.005"THICKNESS: 0.120"+/-.005"
PARALLELISM: 3 ARC MINUTES MAXIMUM.
FLATNESS: 10 WAVES/INCH MAXIMUM, 2 FACES.
SURFACE FINISH: 80-50 PER MIL-O-13830, 2 FACES.
MATERIAL TYPE/QUALITY: BK-7 GLASS, GRADE A, FINE
ANNEALED