SCD3190-02B
$365.00
SAPPHIRE PLATE CD U-CORE
21.59mm X 19.05mm X 0.80mm THK
10 in stock
SKU: SCD3190-02B
Category: SAPPHIRE PLATE
CONFIGURATION: PLATE, PLANE-PARALLEL, W/ TAPERED
GROOVE & 2 THRU-HOLES.
LENGTH: 0.850″+/-.004″
WIDTH: 0.750″+/-.004″
THICKNESS: 0.0315″+/-.0015″
PARALLELISM: 0.0005″ MAXIMUM T.I.R.
TAPERED GROOVE: 1.470″ CYLINDRICAL RADIUS TAPERED
AT 1.062 DEGREES TO FORM A 0.372″
WIDTH AT THE STARTING EDGE AND
ENDS AT A DISTANCE OF 0.2126″ FROM
THE OTHER OPPOSING EDGE.
THRU-HOLES: 0.1094″+/-.0019″ (2 PLACES)
THRU-HOLE LOCATION: SPACED 0.500″ APART (0.125″
FROM C/L) AND 0.685″ FROM
LEADING EDGE.
LEADING EDGE TAPER: 2.25 DEGREES X 0.100″WIDTH
SURFACE FINISH: TOP SURFACE POLSIHED, BACK SURFACE
FINE GROUND.
MATERIAL TYPE/QUALITY: SAPPHIRE, NON-OPTICAL.
| Weight | 0.1 lbs |
|---|
Related products
SCD3765-02B
Configuration: Rectangular Plate, Stepped Face Overall Length: 280.00mm +/- 0.10mm Overall Width: 46.00mm +/- 0.25mm Stepped Width: 35.00mm +/- 0.05mm Step Height: 3.00mm+/- 0.05mm (2 Places) Overall Thickness: 6.00mm +/- 0.10mm Ledge Thickness: 3.00mm Reference Only (2 Places) Parallelism: Controlled by Thickness Tolerances Surface Roughness: < 5 Angstroms RMS on the Critical Face Surface Finish: 20-10 Per MIL-PRF-13830 on the Critical Face Inspection Polish on the End Faces and the Non-Critical Face Edge Chips: No Chips Allowed Along the Critical Face Edges With No Bevels Allowed Edge Bevels: 0.50mm Maximum Face Width x 45 Degrees, 6 Edges Where Shown on Drawing Material Type / Quality: Sapphire, Optical Grade Crystallographic Orientation: c-Plane Coating: None, Not RequiredSCD2374-02A
CONFIGURATION: PLATE, PLANE-PARALLEL, 2 THRU-HOLESLENGTH: 14.00mm +/- 0.10mm
WIDTH: 12.00mm +/- 0.10mm
THICKNESS: 1.00mm +/- 0.05mm
PARALLELISM: NOT SPECIFIED.
HOLE DIAMETER: 2.20mm +/- 0.10mm, 2 PLACES.
HOLE LOCATION: SEE SKETCH.
EDGE BEVEL: LIGHT PROTECTIVE BEVEL, ALL EDGES.
FLATNESS: NOT SPECIFIED.
SURFACE QUALITY: 80-50 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: RANDOM.
SCD1558-01A
LENGTH: 0.6327 +/-.002"WIDTH: 0.375 +/-.002"
THICKNESS: 0.040 +/-.001"
RADIUS, ONE END ONLY: 0.500"
SLOT WIDTH, RADIUS END: 0.010/0.020"
SLOT DEPTH, RADIUS END: 0.003/0.005"
SLOT LOCATED ON CENTER LINE OF LENGTH OF PLATE,
FULL RADIUS ACCEPTABLE AT BOTTOM OF SLOT.
SURFACE FINISH: ALL SURFACES FINE GROUND.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE
CRYSTALLOGRAPHIC ORIENTATION: RANDOM.
SCD1811-01A
CONFIGURATION: RECTANGULAR PLATE WITH SLOTLENGTH: 0.752"+/-.002"
WIDTH: 0.280"+/-.002"
THICKNESS: 0.080"+/-.002"
SLOT WIDTH: 0.612"+/-.002"
SLOT DEPTH: 0.040"+/-.002"
STEP WIDTH (ONE SIDE): 0.070"+/-.002"
SURFACE FINISH: ALL SURFACES FINE GROUND.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: RANDOM
A5A013901040
L & W TOLERANCE: +/-.005"THICKNESS: 0.040"+/-.001"
PARALLELISM: 0.001"/INCH MAXIMUM T.I.R.
SURFACE FINISH: ALL SURFACES FINE GROUND.
MATERIAL QUALITY: OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: RANDOM
SCD2711-02B
CONFIGURATION: RECTANGULAR, PLANE-PARALLELLENGTH: 36.50mm + 0.00mm -/ 0.10mm
WIDTH: 36.00mm + 0.00mm /- 0.10mm
THICKNESS: 3.00mm +/- 0.12mm
PARALLELISM: 5 ARC SECONDS MAXIMUM.
CORNER/EDGE BEVELS: LIGHT PROTECTIVE BEVEL, ALL
CORNERS AND EDGES.
SURFACE ACCURACY: 1/10 WAVE MAXIMUM @ 633um,
2 FACES.
SURFACE QUALITY: 40-20 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001)
COATING: NONE, UNCOATED SUBSTRATE.
A5A910603100
L X W TOLERANCE: +/-.002"THICKNESS: 0.100"+/-.002"
PARALLELISM: 3 ARC MINUTES MAXIMUM.
FLATNESS: UNCONTROLLED.
SURFACE FINISH: 80-50 PER MIL-PRF-13830, 1 FACE.
FINE GROUND OTHER FACE.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: RANDOM.
SCD1540-05A
LENGTH: 0.625 +/-.002"WIDTH: 0.375 +/-.002"
THICKNESS: 0.020 +/-.001"
RADIUS, ONE END ONLY: 0.625"
SLOT WIDTH, RADIUS END: 0.010/0.020"
SLOT DEPTH, RADIUS END: 0.007/0.009"
SLOT LOCATED ON CENTER LINE OF LENGTH OF PLATE,
FULL RADIUS ACCEPTABLE AT BOTTOM OF SLOT.
SURFACE FINISH: ALL SURFACES FINE GROUND.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE
CRYSTALLOGRAPHIC ORIENTATION: RANDOM.