SCD3270-02A

SCD3232-01A

CONFIGURATION: PLATE, PLANE-PARALLEL
LENGTH: 33.318mm +/- 0.025mm
WIDTH: 12.158mm +/- 0.025mm
THICKNESS: 1.000mm +/- 0.025mm
CORNER BEVEL: 1.955mm +/- 0.025mm X 45deg, 4 PLACE
EDGE BEVEL: 0.075mm / 0.250mm X 45deg, ALL EDGES.
SURFACE ACCURACY: < 1/2 WAVE/INCH @ 633nm, 2 FACES
TRANSMITTED WAVEFRONT ERROR: 1/8 MAXIMUM @ 633nm.
SURFACE QUALITY: 20-10 PER MIL-PRF-13830, 2 FACES.
PARALLELISM: < 20 MICRONS T.I.R.
CLEAR APERTURE: DEFINED BY A 1.30mm BORDER, 2 PLCS
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001).
COATING: BROADBAND ANTIREFLECTIVE COATING FOR
1.20% MAXIMUM REFLECTANCE FROM 420nm TO
1000nm WITH A NORMAL +/- 17 DEGREE
INCIDENCE ANGLE, APPLIED TO BOTH FACES.
ENVIROMENTAL REQUIREMENTS PER NOTE 11 ON
DRAWING.

SCD4111-02A

Length: 75.00mm +/- 0.05mm Width: 50.00mm +/- 0.05mm Corner Bevels: Light Protective Bevel, 4 Corners Thickness: 3.20mm +/- 0.05mm Edge Bevels: Light Protective Bevel, 8 Edges Parallelism: Not Specified Flatness: 2 Waves Maximum @ 633nm, Both Faces Surface Quality: 60-40 Per MIL-PRF-13830, Both Faces Clear Aperture: Not Specified Material Type/quality: Sapphire, Optical Grade Crystallographic Orientation: c-Plane Coating: None, Not Required

SCD4317-02A

Length: 0.510"+.000"/-.005" Width: 0.250"+.000"/-.005" Thickness: 0.250"+/-.005" (at the Start of the 2.50 Degree Wedged End) Corner Bevels: Light Protective Bevel, 4 Places Edge Bevels: Light Protective Bevels, 8 Places Wedge Angles: 2.50 Degrees + 0.25 Degree / - 0.00 Degree (One Face) 2.00 Degrees + 0.00 Degree /- 0.25 Degree (Other Face) Flatness: Not Specified Surface Quality: 60-40 Per MIL-PRF-13830, Both Faces. Material Type / Quality: Sapphire, Optical Grade. Crystallographic Orientation: c-Plane Coating: None, Not Required

SCD4487-01A

Length: 19.05mm + 0.00mm /- 0.05mm Width: 12.70mm + 0.00mm /- 0.05mm Thickness: 0.50mm +/- 0.05mm Corner Bevels: 0.10mm Maximum x 45 Degrees, 4 Places Edge Bevels: 0.10mm Maximum x 45 Degrees, 8 Places Parallelism: 3 Arc Minutes Maximum Transmitted Wavefront Error: 1/4 Wave Maximum @ 633nm. Surface Quality: 40-20 Per MIL-PRF-13830, Both Faces Clear Aperture: Central 17.00mm x 11.00mm Rectangular Area, Both Faces Material Type / Quality: Sapphire, Optical Grade. Crystallographic Orientation: C-Plane Coating: Antireflective Coated for Maximum Transmission From 1050nm to 1310nm With a Normal Incidence Angle, Applied to Both Faces

SCD4378-02A

Length: 46.720mm +/- 0.10mm Width: 38.098mm +/- 0.10mm Thickness: 5.00mm +/- 0.10mm Corner Bevels: 0.50mm +/- 0.10mm x 45 Degrees, 4 Places Edge Bevels: 0.20mm +/- 0.10mm x 45 Degrees, 8 Places Parallelism: < 10 Arc Seconds Transmitted Wavefront Error: 1/2 Wave Maximum @ 633nm Surface Quality: 40-20 Per MIL-PRF-13830, Both Faces Material Type / Quality: Sapphire, Optical Grade Crystallographic Orientation: c-Plane Coating: None, Not Required

SCD3854-02A

Length: 70.00mm +/- 0.10mm Width: 32.00mm +/- 0.10mm Thickness: 2.00mm +/- 0.10mm Parallelism: Not Specified. Edge Bevels: 0.25mm Maximum x 45 Degrees, All Edges and Corners. Flatness: 10 Fringes Maximum @ 633nm Over Any 25mm Diameter Within Clear Aperture, Both Faces. Surface Quality: F-F Per ANSI/OEOSC OP1.002-2009, Both Faces. Surface Roughness: < 1.50nm Ra, Both Faces. Clear Aperture: Central 60mm X 26mm Rectangular Area, Both Faces. Material Type/quality: Sapphire, Optical Grade Crystallographic Orientation: c-Plane Coating: None, Not Required.

SCD4178-03A

Length: 0.730"+/-.003" Width: 0.337"+/-.003" Corner Bevels: 0.030"+/-.003" x 45 Degrees, 4 Places Edge Bevels: 0.005"+/-.003" X 45 Degrees, All Edges (All Around Both Faces Including Corners) Thickness: 0.035"+/-.002" Parallelism: < 10 Arc Minutes Transmitted Wavefront Error: 1/4 Wave Maximum @ 633nm Surface Quality: E-E Per MIL-C-48497A, Both Faces. Material Type / Quality: Sapphire, Optical Grade Produced by Kyropolus Method Crystallographic Orientation: c-Plane +/- 2 Degrees Coating / Metallization: None, Not Required

SCD4277-01A

Length: 116.00mm +/- 0.13mm Width: 78.00mm +/- 0.13mm Thickness: 3.00mm +/- 0.13mm Corner Bevels: 0.20mm Nominal x 45 Degrees, 4 Places Edge Bevels: 0.20mm Nominal x 45 Degrees, 8 Places Parallelism: 10 Arc Minutes Maximum Flatness: 1/2 Wave Maximum @ 633nm, Both Faces. Surface Quality: 60-40 Per MIL-PRF-13830, Both Faces. Clear Aperture: Central 98.00mm x 72.00mm Rectangular Area, Both Faces. Material Type / Quality: Sapphire, Optical Grade. Crystallographic Orientation: c-Plane Coating: Broad-band Antireflective Coated for 0.50% Maximum Reflectance Per Surface and Also 98.0% Minimum Average Transmission Both Over the Range of 400nm to 700nm, With a Normal Incidence Angle, Applied to Both Faces.