SCD3276-02A
$295.00
SAPPHIRE SQ.WINDOW UNCOATED
2.300″ X 2.300″ X 0.675mm THK.
1 in stock
LENGTH X WIDTH: 2.300″+.000″/-.005″
THICKNESS: 0.0266″+/-.0009″
PARALLELISM: CONTROLLED BY THICKNESS TOLERANCE.
CORNER BEVEL: 0.010″+/-.005″ X 45deg, 3 PLACES.
0.020″/0.025″ X 45deg, 1 PLACE.
EDGE BEVEL: 0.004″ MAXIMUM X 45deg, 8 PLACES.
SURFACE ACCURACY: 10 WAVES/INCH MAXIMUM, 2 FACES.
SURFACE ROUGHNESS: NOT SPECIFIED.
SURFACE QUALITY: E-E PER MIL-F-48616, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: c-PLANE IN THE FACES
OF THE PART, WITH THE a-PLANE 45
DEGREES TO ONE SET OF EDGE FACES.
THE CORNERS ARE IDENTIFIED BY
BEVELING (1) OF THE CORNERS
0.020″ X 45 DEGREES (SEE ABOVE).
COATING: NONE, NOT REQUIRED.
| Weight | 0.1 lbs |
|---|
Related products
SCD3215-02A
LENGTH X WIDTH: 2.300"+.000"/-.005"THICKNESS: 0.0210"+/-.0010"
PARALLELISM: 0.0005" PER 0.500" MAXIMUM.
CORNER BEVEL: LIGHT PROTECTIVE BEVEL, 4 PLACES.
EDGE BEVEL: 0.004" MAXIMUM X 45deg, 8 PLACES.
SURFACE ACCURACY: NOT SPECIFIED.
SURFACE ROUGHNESS: 0.70nm RMS MAXIMUM.
SURFACE QUALITY: 20-10 PER MIL-PRF-48616, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: c-PLANE.
COATING: NONE, NOT REQUIRED.
SCD4397-02A
Length: 50.00mm +/- 0.25mm Width: 50.00mm +/- 0.25mm Thickness: 0.50mm +/- 0.25mm Corner Bevels: Light Protective Bevel, 4 Places Edge Bevels: Light Protective Bevel, 8 Places Parallelism: Not Specified Flatness: Not Specified Surface Quality: 60-40 Per MIL-PRF-13830, Both Faces. Material Type / Quality: Sapphire, Optical Grade Crystallographic Orientation: c-Plane Coating: None, Not RequiredSCD3646-02A
LENGTH X WIDTH: 2.400"+/-.005"THICKNESS: 1.8875mm +/- 0.0125mm
PARALLELISM: CONTROLLED BY THICKNESS
CORNER BEVEL: LIGHT PROTECTIVE BEVEL, 4 PLACES.
EDGE BEVEL: 0.25mm MAXIMUM X 45deg, 8 PLACES.
SURFACE ACCURACY: < 10 FRINGES/INCH, 2 FACES
SURFACE ROUGHNESS: < 0.70nm Ra, 2 FACES.
SURFACE QUALITY: F-F PER ANSI/OEOSC OP1.002-2009,
BOTH FACES.
CLEAR APERTURE: CENTRAL 2.200" SQ.AREA, 2 FACES
EDGE CHIPS: < 0.50mm FROM EDGE OF PART.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: c-PLANE +/- 2 Deg.
COATING: NONE, NOT REQUIRED.