SCD3502-02A
$158.00
SAPPHIRE RECT.WINDOW UC
20.00mm X 7.10mm X 2.50mm THK.
SKU: SCD3502-02A
Category: SAPPHIRE RECT.WINDOW
CONFIGURATION: RECTANGULAR PLATE, PLANE-PARALLEL.
LENGTH: 20.00mm +/- 0.10mm
WIDTH: 7.10mm +/- 0.10mm
THICKNESS: 2.50mm +/- 0.10mm
PARALLELISM: 5 ARC MINUTES MAXIMUM.
CORNER BEVELS: 0.10mm NOMINAL X 45deg, 4 PLACES.
EDGE BEVELS: 0.10mm NOMINAL X 45deg, 8 PLACES.
SURFACE ACCURACY: 1/10 WAVE MAXIMUM @ 633nm,
2 FACES.
SURFACE QUALITY: 10-5 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001)
COATING: NONE, NOT REQUIRED.
| Weight | 0.1 lbs |
|---|
Related products
SCD4408-02A
Length: 7.600"+/-.005" Width: 5.600"+/-.005" Corner Bevels: 0.015"+/-.005" x 45 Degrees, 4 Places Edge Bevels: 0.010"+/-.005" x 45 Degrees, 8 Places Thickness: 0.100"+/-.005" Parallelism: < 3.0 Arc Minutes Flatness: < 2.0 Waves @ 633nm Over Any 2.0" Sub-Aperture Within Overall Clear Aperture, Both Faces Surface Quality: 60-40 Per MIL-PRF-13830, Both Faces Clear Aperture: Central 7.100" x 5.100" Area, Both Faces Material Type / Quality: Sapphire, Optical Grade Crystallographic Orientation: c-Plane Coating: None, Not RequiredSCD4233-02A
Outer Length: 1.614"+/-.005" Outer Width: 1.334"+/-.005" Inner Length: 1.454"+/-.005" Inner Width: 1.174"+/-.005" Radii at Intersecting Faces: 0.025"+/-.005" Overall Thickness: 0.158"+/-.005" Major Rectangular Face Thickness: 0.058"+/-.005" Minor Rectangular Face Height: 0.100" Reference Only Edge Bevels: 0.005"/0.010" x 45 Degrees, All Edges Surface Accuracy: Power: 8 Fringes Maximum @ 633nm, Both Faces Irregularity: 5 Fringes Maximum @ 633nm, Both Faces Transmitted Wavefront Error: 0.125 Waves RMS Maximum @ 633nm Surface Quality: 1x.05;l1x0.08;e0.5 Per ISO 10110 Material Type / Quality: Sapphire, Optical Grade Coating: None, Not RequiredSCD2718-01B
CONFIGURATION: PLATE, PLANE-PARALLELLENGTH: 20.00mm +/- 0.10mm
WIDTH: 8.00mm +/- 0.10mm
THICKNESS: 3.00mm +/- 0.10mm
CORNER BEVEL: LIGHT PROTECTIVE BEVEL, 4 PLACES.
EDGE BEVEL: LIGHT PROTECTIVE BEVELS ALL EDGES.
SURFACE ACCURACY: 1/10 WAVE MAXIMUM OVER 95% C.A.
SURFACE QUALITY: 20-10 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE
CRYSTALLOGRAPHIC ORIENTATION: (0001) NOMINAL
COATING: ANTIREFLECTIVE COAT FOR MAXIMUM
TRANSMISSION AT 808 NANOMETERS WITH A
NORMAL INCIDENCE ANGLE, APPLIED TO
ONE FACE ONLY.
SCD3232-01A
CONFIGURATION: PLATE, PLANE-PARALLELLENGTH: 33.318mm +/- 0.025mm
WIDTH: 12.158mm +/- 0.025mm
THICKNESS: 1.000mm +/- 0.025mm
CORNER BEVEL: 1.955mm +/- 0.025mm X 45deg, 4 PLACE
EDGE BEVEL: 0.075mm / 0.250mm X 45deg, ALL EDGES.
SURFACE ACCURACY: < 1/2 WAVE/INCH @ 633nm, 2 FACES
TRANSMITTED WAVEFRONT ERROR: 1/8 MAXIMUM @ 633nm.
SURFACE QUALITY: 20-10 PER MIL-PRF-13830, 2 FACES.
PARALLELISM: < 20 MICRONS T.I.R.
CLEAR APERTURE: DEFINED BY A 1.30mm BORDER, 2 PLCS
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001).
COATING: BROADBAND ANTIREFLECTIVE COATING FOR
1.20% MAXIMUM REFLECTANCE FROM 420nm TO
1000nm WITH A NORMAL +/- 17 DEGREE
INCIDENCE ANGLE, APPLIED TO BOTH FACES.
ENVIROMENTAL REQUIREMENTS PER NOTE 11 ON
DRAWING.