SCD3753-02A

SCD3854-02A

Length: 70.00mm +/- 0.10mm Width: 32.00mm +/- 0.10mm Thickness: 2.00mm +/- 0.10mm Parallelism: Not Specified. Edge Bevels: 0.25mm Maximum x 45 Degrees, All Edges and Corners. Flatness: 10 Fringes Maximum @ 633nm Over Any 25mm Diameter Within Clear Aperture, Both Faces. Surface Quality: F-F Per ANSI/OEOSC OP1.002-2009, Both Faces. Surface Roughness: < 1.50nm Ra, Both Faces. Clear Aperture: Central 60mm X 26mm Rectangular Area, Both Faces. Material Type/quality: Sapphire, Optical Grade Crystallographic Orientation: c-Plane Coating: None, Not Required.

SCD4175-02A

Diameter: 0.750"+/-.002" Thickness: 0.020"+/-.002" Parallelism: 3 Arc Minutes Maximum. Edge Bevel: 0.003"/0.007" x 45 Degrees, Both Edges Flatness: 10 Waves Per Inch Maximum @ 633nm, Both Faces Surface Finish: 80-50 Per MIL-PRF-13830, Both Faces Material Type / Quality: Sapphire, Optical Grade. Crystallographic Orientation: c-Plane

SCD4111-02A

Length: 75.00mm +/- 0.05mm Width: 50.00mm +/- 0.05mm Corner Bevels: Light Protective Bevel, 4 Corners Thickness: 3.20mm +/- 0.05mm Edge Bevels: Light Protective Bevel, 8 Edges Parallelism: Not Specified Flatness: 2 Waves Maximum @ 633nm, Both Faces Surface Quality: 60-40 Per MIL-PRF-13830, Both Faces Clear Aperture: Not Specified Material Type/quality: Sapphire, Optical Grade Crystallographic Orientation: c-Plane Coating: None, Not Required

SCD4306-02A

Length: 67.00mm +/- 0.10mm Width: 15.00mm +/- 0.10mm Thickness: 1.00mm +/- 0.050mm Corner Bevels: 0.30mm +/- 0.10mm x 45 Degrees, 4 Places Edge Bevels: 0.15mm +/- 0.075mm x 45 Degrees, 8 Places Parallelism: 5 Arc Minutes Maximum Flatness: 8 Fringes Per Inch Maximum @ 633nm, Both Faces Surface Quality: 60-40 Per MIL-PRF-13830, Both Faces. Material Type / Quality: Sapphire, Optical Grade. Crystallographic Orientation: c-Plane

SCD3270-02A

LENGTH: 82.00mm + 0.00mm /- 0.10mm
WIDTH: 60.00mm + 0.00mm /- 0.10mm
CORNER RADII: 50.00mm NOM. X 1.00mm, 4 PLACES.
THICKNESS: 1.50mm +/- 0.10mm
PARALLELISM: 10 ARC SECONDS MAXIMUM.
EDGE BEVEL: LIGHT PROTECTIVE BEVEL, ALL EDGES.
FLATNESS: 2 WAVES/INCH MAXIMUM @ 633nm, 2 FACES.
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001).
COATING: NONE, NOT REQUIRED.
NOTE: CORNER RADII ARE RESIDUAL FROM SHAPING A
100.00mm DIAMETER PART.

SCD2718-01B

CONFIGURATION: PLATE, PLANE-PARALLEL
LENGTH: 20.00mm +/- 0.10mm
WIDTH: 8.00mm +/- 0.10mm
THICKNESS: 3.00mm +/- 0.10mm
CORNER BEVEL: LIGHT PROTECTIVE BEVEL, 4 PLACES.
EDGE BEVEL: LIGHT PROTECTIVE BEVELS ALL EDGES.
SURFACE ACCURACY: 1/10 WAVE MAXIMUM OVER 95% C.A.
SURFACE QUALITY: 20-10 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE
CRYSTALLOGRAPHIC ORIENTATION: (0001) NOMINAL
COATING: ANTIREFLECTIVE COAT FOR MAXIMUM
TRANSMISSION AT 808 NANOMETERS WITH A
NORMAL INCIDENCE ANGLE, APPLIED TO
ONE FACE ONLY.

SCD3232-01A

CONFIGURATION: PLATE, PLANE-PARALLEL
LENGTH: 33.318mm +/- 0.025mm
WIDTH: 12.158mm +/- 0.025mm
THICKNESS: 1.000mm +/- 0.025mm
CORNER BEVEL: 1.955mm +/- 0.025mm X 45deg, 4 PLACE
EDGE BEVEL: 0.075mm / 0.250mm X 45deg, ALL EDGES.
SURFACE ACCURACY: < 1/2 WAVE/INCH @ 633nm, 2 FACES
TRANSMITTED WAVEFRONT ERROR: 1/8 MAXIMUM @ 633nm.
SURFACE QUALITY: 20-10 PER MIL-PRF-13830, 2 FACES.
PARALLELISM: < 20 MICRONS T.I.R.
CLEAR APERTURE: DEFINED BY A 1.30mm BORDER, 2 PLCS
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001).
COATING: BROADBAND ANTIREFLECTIVE COATING FOR
1.20% MAXIMUM REFLECTANCE FROM 420nm TO
1000nm WITH A NORMAL +/- 17 DEGREE
INCIDENCE ANGLE, APPLIED TO BOTH FACES.
ENVIROMENTAL REQUIREMENTS PER NOTE 11 ON
DRAWING.

SCD4233-02A

Outer Length: 1.614"+/-.005" Outer Width: 1.334"+/-.005" Inner Length: 1.454"+/-.005" Inner Width: 1.174"+/-.005" Radii at Intersecting Faces: 0.025"+/-.005" Overall Thickness: 0.158"+/-.005" Major Rectangular Face Thickness: 0.058"+/-.005" Minor Rectangular Face Height: 0.100" Reference Only Edge Bevels: 0.005"/0.010" x 45 Degrees, All Edges Surface Accuracy: Power: 8 Fringes Maximum @ 633nm, Both Faces Irregularity: 5 Fringes Maximum @ 633nm, Both Faces Transmitted Wavefront Error: 0.125 Waves RMS Maximum @ 633nm Surface Quality: 1x.05;l1x0.08;e0.5 Per ISO 10110 Material Type / Quality: Sapphire, Optical Grade Coating: None, Not Required