Length: 2.300″+.000″/-.005″
Width: 1.100″+.000″/-.005″
Thickness: 0.987mm +/- 0.005mm
Edge Bevel: 0.010″ Maximum x 45 Degrees, All Edges
Cylindrical Radius Edge: 7.500″+.000″/-.010″ (1 Place)
Radius Edge Position: Centered to Length Dimension
Parallelism: 0.010mm Maximum T.T.V. Over Any
24.00mm X 19.90mm Sub-Aperture
Clear Aperture: Central 52.80mm X 21.50mm
Rectangular Area, Both Faces
T.W.F.E: 200nm RMS Maximum @ 633nm Over Any
24.00mm X 19.90mm Sub-Aperture
Surface Roughness: 7 Angstroms RMS Maximum, Both Faces
Surface Quality: 20-10 Per MIL-PRF-13830, Both Faces
Material Type / Quality: Sapphire, Optical Grade
Crystallographic Orientation: c-Plane
Drawing: D504364-01 Rev.A (Marked-Up)
| Weight | 0.1 lbs |
|---|
Related products
SCD3689-02A
LENGTH: 0.875"+/-.002"WIDTH: 0.4375"+/-.0020"
CORNER BEVELS: 0.040"+/-.002" X 45deg, 4 PLACES.
THICKNESS: 0.165"+/-.002" (HIGH SIDE OF WEDFGE)
WEDGE ANGLE: 1.00 DEGREE +/- 0.10 DEGREE
WEDGE DIRECTION: ALONG THE 0.875" LENGTH.
EDGE BEVELS: LIGHT PROTECTIVE BEVEL ALL EDGES.
SURFACE ACCURACY: NOT SPECIFIED.
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: c-PLANE
COATING: NONE, NOT REQUIRED.
SCD2718-01B
CONFIGURATION: PLATE, PLANE-PARALLELLENGTH: 20.00mm +/- 0.10mm
WIDTH: 8.00mm +/- 0.10mm
THICKNESS: 3.00mm +/- 0.10mm
CORNER BEVEL: LIGHT PROTECTIVE BEVEL, 4 PLACES.
EDGE BEVEL: LIGHT PROTECTIVE BEVELS ALL EDGES.
SURFACE ACCURACY: 1/10 WAVE MAXIMUM OVER 95% C.A.
SURFACE QUALITY: 20-10 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE
CRYSTALLOGRAPHIC ORIENTATION: (0001) NOMINAL
COATING: ANTIREFLECTIVE COAT FOR MAXIMUM
TRANSMISSION AT 808 NANOMETERS WITH A
NORMAL INCIDENCE ANGLE, APPLIED TO
ONE FACE ONLY.
SCD4306-02A
Length: 67.00mm +/- 0.10mm Width: 15.00mm +/- 0.10mm Thickness: 1.00mm +/- 0.050mm Corner Bevels: 0.30mm +/- 0.10mm x 45 Degrees, 4 Places Edge Bevels: 0.15mm +/- 0.075mm x 45 Degrees, 8 Places Parallelism: 5 Arc Minutes Maximum Flatness: 8 Fringes Per Inch Maximum @ 633nm, Both Faces Surface Quality: 60-40 Per MIL-PRF-13830, Both Faces. Material Type / Quality: Sapphire, Optical Grade. Crystallographic Orientation: c-PlaneSCD4488-01A
Length: 19.05mm + 0.00mm /- 0.05mm Width: 12.70mm + 0.00mm /- 0.05mm Thickness: 0.50mm +/- 0.05mm Corner Bevels: 0.10mm Maximum x 45 Degrees, 4 Places Edge Bevels: 0.10mm Maximum x 45 Degrees, 8 Places Parallelism: 3 Arc Minutes Maximum Transmitted Wavefront Error: 1/4 Wave Maximum @ 633nm. Surface Quality: 40-20 Per MIL-PRF-13830, Both Faces Clear Aperture: Central 17.00mm x 11.00mm Rectangular Area, Both Faces Material Type / Quality: Sapphire, Optical Grade. Crystallographic Orientation: C-Plane Coating: Antireflective Coated for Maximum Transmission From 750nm to 1050nm With a Normal Incidence Angle, Applied to Both FacesSCD4268-02A
Length: 20.10mm + 0.00mm /- 0.10mm Width: 11.10mm + 0.00mm /- 0.10mm Thickness: 1.00mm +/- 0.05mm Corner Bevels: Light Protective Bevel, 4 Places Edge Bevels: Light Protective Bevels, 8 Places Parallelism: 1 Arc Minute Maximum Flatness: 1/2 Wave Maximum @ 633nm, Both Faces Surface Quality: 60-40 Per MIL-PRF-13830, Both Faces Clear Aperture: Central 18.10mm X 10.00mm Rectangular Area, Both Faces Material Type / Quality: Sapphire, Optical Grade Crystallographic Orientation: c-Plane Coating: None, Not RequiredSCD3232-01A
CONFIGURATION: PLATE, PLANE-PARALLELLENGTH: 33.318mm +/- 0.025mm
WIDTH: 12.158mm +/- 0.025mm
THICKNESS: 1.000mm +/- 0.025mm
CORNER BEVEL: 1.955mm +/- 0.025mm X 45deg, 4 PLACE
EDGE BEVEL: 0.075mm / 0.250mm X 45deg, ALL EDGES.
SURFACE ACCURACY: < 1/2 WAVE/INCH @ 633nm, 2 FACES
TRANSMITTED WAVEFRONT ERROR: 1/8 MAXIMUM @ 633nm.
SURFACE QUALITY: 20-10 PER MIL-PRF-13830, 2 FACES.
PARALLELISM: < 20 MICRONS T.I.R.
CLEAR APERTURE: DEFINED BY A 1.30mm BORDER, 2 PLCS
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001).
COATING: BROADBAND ANTIREFLECTIVE COATING FOR
1.20% MAXIMUM REFLECTANCE FROM 420nm TO
1000nm WITH A NORMAL +/- 17 DEGREE
INCIDENCE ANGLE, APPLIED TO BOTH FACES.
ENVIROMENTAL REQUIREMENTS PER NOTE 11 ON
DRAWING.
SCD3502-02A
CONFIGURATION: RECTANGULAR PLATE, PLANE-PARALLEL.LENGTH: 20.00mm +/- 0.10mm
WIDTH: 7.10mm +/- 0.10mm
THICKNESS: 2.50mm +/- 0.10mm
PARALLELISM: 5 ARC MINUTES MAXIMUM.
CORNER BEVELS: 0.10mm NOMINAL X 45deg, 4 PLACES.
EDGE BEVELS: 0.10mm NOMINAL X 45deg, 8 PLACES.
SURFACE ACCURACY: 1/10 WAVE MAXIMUM @ 633nm,
2 FACES.
SURFACE QUALITY: 10-5 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001)
COATING: NONE, NOT REQUIRED.