SCD4378-02A

SCD4341-02A

Length: 40.00mm + 0.00mm /- 0.10mm Width: 34.00mm + 0.00mm /- 0.10mm Corner Radii: 4.00mm +/- 0.10mm, 4 Places Edge Bevels: 0.10mm +/- 0.035mm x 45 Degress, All Round Both Faces Thickness: 0.95mm +/- 0.05mm Parallelism: < 10 Arc Seconds Transmitted Wavefront Error: Power: 1.0 Wave Maximum @ 633nm Irregularity: 0.5 Wave Maximum @ 633nm Surface Quality: 10-5 Scratch-Dig Per MIl-PRF-13830, both Faces Material Type / Quality: Sapphire, Optical Grade Crystallographic Orientation: c-Plane Coating: None, Not Required  

SCD4175-02A

Diameter: 0.750"+/-.002" Thickness: 0.020"+/-.002" Parallelism: 3 Arc Minutes Maximum. Edge Bevel: 0.003"/0.007" x 45 Degrees, Both Edges Flatness: 10 Waves Per Inch Maximum @ 633nm, Both Faces Surface Finish: 80-50 Per MIL-PRF-13830, Both Faces Material Type / Quality: Sapphire, Optical Grade. Crystallographic Orientation: c-Plane

SCD4244-02B

Length: 2.300"+.000"/-.005" Width: 1.100"+.000"/-.005" Thickness: 0.987mm +/- 0.005mm Edge Bevel: 0.010" Maximum x 45 Degrees, All Edges Cylindrical Radius Edge: 7.500"+.000"/-.010" (1 Place) Radius Edge Position: Centered to Length Dimension Parallelism: 0.010mm Maximum T.T.V. Over Any 24.00mm X 19.90mm Sub-Aperture Clear Aperture: Central 52.80mm X 21.50mm Rectangular Area, Both Faces T.W.F.E: 200nm RMS Maximum @ 633nm Over Any 24.00mm X 19.90mm Sub-Aperture Surface Roughness: 7 Angstroms RMS Maximum, Both Faces Surface Quality: 20-10 Per MIL-PRF-13830, Both Faces Material Type / Quality: Sapphire, Optical Grade Crystallographic Orientation: c-Plane Drawing: D504364-01 Rev.A (Marked-Up)

SCD4277-01A

Length: 116.00mm +/- 0.13mm Width: 78.00mm +/- 0.13mm Thickness: 3.00mm +/- 0.13mm Corner Bevels: 0.20mm Nominal x 45 Degrees, 4 Places Edge Bevels: 0.20mm Nominal x 45 Degrees, 8 Places Parallelism: 10 Arc Minutes Maximum Flatness: 1/2 Wave Maximum @ 633nm, Both Faces. Surface Quality: 60-40 Per MIL-PRF-13830, Both Faces. Clear Aperture: Central 98.00mm x 72.00mm Rectangular Area, Both Faces. Material Type / Quality: Sapphire, Optical Grade. Crystallographic Orientation: c-Plane Coating: Broad-band Antireflective Coated for 0.50% Maximum Reflectance Per Surface and Also 98.0% Minimum Average Transmission Both Over the Range of 400nm to 700nm, With a Normal Incidence Angle, Applied to Both Faces.

SCD4352-02A

Length: 37.50mm +/- 0.10mm Bottom Width: 7.10mm +/- 0.10mm Top Width: 5.19mm Reference Only Taper on Side Edges: 10.0 Degrees +/- 0.10 Degree (Included Angle) See Drawing Height: 10.90mm +/- 0.10mm Edge Bevels: Light Protective Bevel, All Edges Parallelism: 10 Arc Minutes Maximum Flatness: Not Specified Surface Finish: (2) Faces Polished 60-40 Per MIL-PRF-13830. Faces: 37.50mm x 7.10mm Face 37.50mm x 5.19mm Face All Other Surfaces Fine Ground Material Type / Quality: Sapphire, Optical Grade Crystallographic Orientation: Random Coating: None, Not Required

SCD3232-01A

CONFIGURATION: PLATE, PLANE-PARALLEL
LENGTH: 33.318mm +/- 0.025mm
WIDTH: 12.158mm +/- 0.025mm
THICKNESS: 1.000mm +/- 0.025mm
CORNER BEVEL: 1.955mm +/- 0.025mm X 45deg, 4 PLACE
EDGE BEVEL: 0.075mm / 0.250mm X 45deg, ALL EDGES.
SURFACE ACCURACY: < 1/2 WAVE/INCH @ 633nm, 2 FACES
TRANSMITTED WAVEFRONT ERROR: 1/8 MAXIMUM @ 633nm.
SURFACE QUALITY: 20-10 PER MIL-PRF-13830, 2 FACES.
PARALLELISM: < 20 MICRONS T.I.R.
CLEAR APERTURE: DEFINED BY A 1.30mm BORDER, 2 PLCS
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001).
COATING: BROADBAND ANTIREFLECTIVE COATING FOR
1.20% MAXIMUM REFLECTANCE FROM 420nm TO
1000nm WITH A NORMAL +/- 17 DEGREE
INCIDENCE ANGLE, APPLIED TO BOTH FACES.
ENVIROMENTAL REQUIREMENTS PER NOTE 11 ON
DRAWING.

SCD3753-02A

LENGTH: 2.187"+/-.005" WIDTH: 1.187"+/-.005"
THICKNESS: 0.0385"+/-.0035"
PARALLELISM: 3 ARC MINUTES MAXIMUM.
FLATNESS: 5 WAVES/INCH MAXIMUM, 2 FACES.
SURFACE FINISH: 80-50 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: RANDOM.
COATING: NONE, NOT REQUIRED.

SCD3689-02A

LENGTH: 0.875"+/-.002"
WIDTH: 0.4375"+/-.0020"
CORNER BEVELS: 0.040"+/-.002" X 45deg, 4 PLACES.
THICKNESS: 0.165"+/-.002" (HIGH SIDE OF WEDFGE)
WEDGE ANGLE: 1.00 DEGREE +/- 0.10 DEGREE
WEDGE DIRECTION: ALONG THE 0.875" LENGTH.
EDGE BEVELS: LIGHT PROTECTIVE BEVEL ALL EDGES.
SURFACE ACCURACY: NOT SPECIFIED.
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: c-PLANE
COATING: NONE, NOT REQUIRED.