SCD2366-02A

CONFIGURATION: PLATE, PLANE-PARALLEL
LENGTH: 13.56mm +/- 0.05mm
WIDTH: 6.64mm +/- 0.05mm
THICKNESS: 0.250mm +/- 0.025mm
PARALLELISM: CONTROLLED BY THICKNESS TOLERANCE.
EDGE BEVEL: NOT REQUIRED.
SURFACE ACCURACY: NOT SPECIFIED.
CLEAR APERTURE: CENTRAL 90%
SURFACE QUALITY: 80-50 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: RANDOM
COATING: NONE, NOT REQUIRED.

SCD2369-02A

DIAMETER: 15.90mm + 0.00mm /- 0.10mm
THICKNESS: 1.10mm +/- 0.12mm
PARALLELISM: 0.025mm/mm MAXIMUM T.I.R.
PERPENDICULARITY: 0.025mm/mm MAXIMUM T.I.R.
FLATNESS: 10 WAVES/INCH MAXIMUM, 2 FACES.
EDGE BEVEL: PROTECTIVE EDGE BREAK, 2 PLACES.
SURFACE FINISH: 40/20 PER MIL-O-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, CSI WHITE HIGH
PURITY, HEMLITE, NOT VUV TREATED.
CRYSTALLOGRAPHIC ORIENTATION: (0001) +/- 2deg.
COATING: NONE, NOT REQUIRED.

SCD2373-02A

DIAMETER: 50.00mm + 0.00mm /- 0.25mm
THICKNESS: 0.750mm +/- 0.010mm
PARALLELISM: 20 ARC SECONDS MAXIMUM.
TRANSMITTED WAVEFRONT ERROR: 1 WAVE MAXIMUM OVER
ANY 1.00"DIAMETER.
SURFACE QUALITY: 10-5 PER MIL-PRF-13830, 2 FACES.
WITH NOT MORE THAN FIVE No.5 DIGS
WITHIN THE ENTIRE CLEAR APERTURE.
CLEAR APERTURE: CENTRAL 40.00mm MINIMUM DIAMETER.
EDGE BEVELS: 0.20mm MAXIMUM X 45deg, 2 PLACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: M-PLANE +/- 1/2 deg
COATING: NONE, NOT REQUIRED.

SCD2378-02A

CONFIGURATION: DISC (W/ OD FLATS), PLANE-PARALLEL
DIAMETER: 100.00mm +/- 0.10mm
THICKNESS: 0.025"+/-.002"
PARALLELISM: 3 ARC MINUTES MAXIMUM.
PRIMARY FLAT SIZE: 32.00mm +/- 2.00mm WIDTH
PRIMARY FLAT LOCATION: RANDOM.
SECONDARY FLAT SIZE: 18.00mm +/- 2.00mm WIDTH.
SECONDARY FLAT LOCATION: 90 deg FROM PRIMARY FLAT.
EDGE BEVEL: LIGHT PROTECTIVE BEVEL, 2 PLACES.
SURFACE QUALITY: 80-50 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALOGRAPHIC ORIENTATION: RANDOM

SCD2378-02B

CONFIGURATION: DISC (W/ OD FLATS), PLANE-PARALLEL
DIAMETER: 100.00mm +/- 0.10mm
THICKNESS: 0.025"+/-.0005"
PARALLELISM: 0.000138" T.T.V. ( 0.0035mm )
PRIMARY FLAT SIZE: 32.00mm +/- 2.00mm WIDTH
PRIMARY FLAT LOCATION: RANDOM.
SECONDARY FLAT SIZE: 18.00mm +/- 2.00mm WIDTH.
SECONDARY FLAT LOCATION: 90 deg FROM PRIMARY FLAT.
EDGE BEVEL: LIGHT PROTECTIVE BEVEL, 2 PLACES.
SURFACE QUALITY: 80-50 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION:(0001)

SCD2387-02A

DIAMETER: 0.350"+/-.001
THICKNESS: 0.050"+/-.002
PARALLELISM: 0.001" MAXIMUM T.I.R.
FLATNESS: 0.0002"/INCH MAXIMUM T.I.R., 2 FACES.
EDGE BEVEL: 0.015+/-.005" X 45deg, ONE SIDE
0.005" MAXIMUM X 45deg, ONE SIDE
SURFACE FINISH: 50-20 PER MIL-PRF-13830, 2 FACES.
EDGE AND BEVEL FINISH: FINE GROUND.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE
CRYSTALLOGRAPHIC ORIENTATION: RANDOM
COATING: NONE, NOT REQUIRED.

SCD2414-01A

MAJOR DIAMETER: 0.500"+.000"/-.005"
MINOR DIAMETER: 0.230"+.000"/-.003"
OVERALL THICKNESS: 0.118"+/-.005"
MAJOR DIAMETER THICKNESS: 0.079"+/-.005"
PARALLELISM: 0.001"/INCH MAXIMUM T.I.R.
CONCENTRICITY: DIAMETERS WITHIN 0.001".
EDGE BEVELS: 0.010"+/-.005" X 45deg, 2 PLACES
(MAJOR DIAMETER EDGES)
NO BEVEL ON MINOR DIAMETER FACE EDGE.
SURFACE ACCURACY: NOT SPECIFIED.
SURFACE QUALITY: 80-50 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001)
COATING: ANTIREFLECTIVE COATED FOR MAXIMUM
TRANSMISSION AT 3.0 MICRONS WITH A
NORMAL INCIDENCE ANGLE, APPLIED TO
BOTH FACES.

SCD2421-01B

CONFIGURATION: DISC, PLANE-PARALLEL
DIAMETER: 1.500"+.000"/-.002"
THICKNESS: 0.200"+/-.001"
PARALLELISM: CONTROLLED BY THICKNESS TOLERANCE.
EDGE BEVEL: 0.020"+/-.005" X 45deg, 1 PLACE
0.050" REF. X 45deg, 1 PLACE.(SEE DWG)
SURFACE ACCURACY: NOT SPECIFIED.
SURFACE QUALITY: 40-20 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: RANDOM.
METALIZATION, ITO, AND SiO COATINGS PER DRAWING
703030, Rev C, RED LINE DRAWING.
MADE FROM SCD2421-01A BY REMOVING ITO COATING
FROM THE METALIZATION, OTHER DIMENSIONS PER
PREVIOUS REVISION.

SCD2427-02A

CONFIGURATION: DISC, PLANE-PARALLEL
DIAMETER: 0.635"+.000"/-.001"
THICKNESS: 0.060"+/-.001"
PARALLELISM: 10 ARC SECONDS MAXIMUM.
EDGE BEVEL: 0.010" MAXIMUM FACE WIDTH, 2 PLACES.
TRANSMITTED WAVEFRONT: < 0.03 WAVES RMS @ 633um.
SURFACE QUALITY: F-F PER MIL-F-48616, 2 FACES.
CLEAR APERTURE: CENTRAL 0.580" DIAMETER FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, PREMIUM OPTICAL
GRADE. STRESS FREE, NO
INCLUSIONS.
CRYSTALLOGRAPHIC ORIENTATION: (0001) +/- 5 DEGREES
COATING: NONE, NOT REQUIRED.

SCD2432-02A

DIAMETER: 1.000"+.000"/-.005"
THICKNESS: 0.020"+/-.002"
PARALLELISM: 10 ARC SECONDS MAXIMUM.
FLATNESS: 1/2 WAVE MAXIMUM @ 633nm, 2 FACES.
EDGE BEVEL: 0.005" NOMINAL X 45deg, 2 PLACES.
SURFACE FINISH: 60-40 PER MIL-PRF-13830. 2 FACES.
CLEAR APERTURE: CENTRAL 85% OF DIAMETER FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: m-PLANE
COATING: NONE, NOT REQUIRED.

SCD2433-02A

DIAMETER: 2.000"+.000"/-.005"
THICKNESS: 0.020"+/-.002"
PARALLELISM: 10 ARC SECONDS MAXIMUM.
FLATNESS: 1/2 WAVE MAXIMUM @ 633nm, 2 FACES.
EDGE BEVEL: 0.005" NOMINAL X 45deg, 2 PLACES.
SURFACE FINISH: 60-40 PER MIL-PRF-13830. 2 FACES.
CLEAR APERTURE: CENTRAL 85% OF DIAMETER FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: M-PLANE
COATING: NONE, NOT REQUIRED.

SCD2460-01A

CONFIGURATION: DISC, CONICAL OD, PLANE-PARALLEL
MAJOR DIAMETER: 10.00mm +/-.050mm (PRIOR TO BEVEL)
MINOR DIAMETER: 8.00mm REF.
OD TAPER ANGLE: 14.036 DEGREES +/- 10 ARC MINUTES.
(28.072 DEGREES INCLUDED ANGLE)
THICKNESS: 4.00mm +/- 0.05mm
PARALLELISM: 5 ARC MINUTES MAXIMUM.
FLATNESS: NOT SPECIFIED.
EDGE BEVELS: 0.005"/0.010" X 45deg, 2 PLACES.
SURFACE QUALITY: 10-5 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001) +/- 2 DEGREES
COATING: ANTIREFLECTIVE COAT FOR MAXIMUM
TRANSMISSION AT 1.064 MICRONS WITH A
NORMAL INCIDENCE ANGLE, APPLIED TO THE
10.00mm DIAMETER FACE ONLY.
DAMAGE THRESHOLD: > 900 MEGAWATTS.

SCD2471-02A

MAJOR DIAMTER: 6.00mm +/- 0.10mm
MINOR DIAMETER FACE: 1.30mm +/-.10mm
THICKNESS: 5.00mm +/- 0.05mm
PARALLELISM: 3 ARC MINUTES MAXIMUM.
CONICAL ANGLE: 60 DEGREES +/- 5 ARC MINUTES
(120 DEGREES INCLUDED ANGLE)
X DEPTH REQUIRED TO FORM THE 1.30mm
FACE.
SURFACE ACCURACY: NOT SPECIFIED.
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYTALLOGRAPHIC ORIENTATION: (0001).
COATING: NONE, NOT REQUIRED.

SCD2471-02B

MAJOR DIAMETER: 6.00mm +/- 0.10mm
MINOR DIAMETER FACE: 1.20mm +/-.10mm
THICKNESS: 5.00mm +/- 0.05mm
PARALLELISM: 3 ARC MINUTES MAXIMUM.
CONICAL ANGLE: 60 DEGREES +/- 5 ARC MINUTES
(120 DEGREES INCLUDED ANGLE)
X DEPTH REQUIRED TO FORM THE 1.20mm
FACE.
SURFACE ACCURACY: NOT SPECIFIED.
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYTALLOGRAPHIC ORIENTATION: (0001).
COATING: NONE, NOT REQUIRED.

SCD2471-05B

DIAMETER: 6.00mm +/- 0.10mm
THICKNESS: 5.00mm +/- 0.05mm
PARALLELISM: 10 ARC SECONDS MAXIMUM.
EDGE BEVEL: LIGHT PROTECTIVE BEVEL, 2 PLACES.
SURFACE ACCURACY: 1/10 WAVE MAXIMUM, 2 FACES.
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYTALLOGRAPHIC ORIENTATION: c-PLANE.
COATING: NONE, NOT REQUIRED.

SCD2501-02A

OUTER DIAMETER: 38.10mm + 0.00mm /- 0.10mm
INNER DIAMETER: 4.00mm +/- 0.10mm
CONCENTRICITY: OD TO ID WITHIN 0.013mm MAXIMUM TIR
THICKNESS: 4.00mm +/- 0.05mm
PARALLELISM: 2 ARC SECONDS MAXIMUM.
FLATNESS: 1/5 WAVE MAXIMUM @ 633um, 2 FACES.
SURFACE FINISH: 60-40 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001).

SCD2503-01A

DIAMETER: 31.95mm + 0.00mm /- 0.25mm
THICKNESS: 3.00mm +/- 0.05mm
PARALLELISM: 3 ARC MINUTES MAXIMUM.
EDGE BEVEL: PROTECTIVE EDGE BREAK, 2 PLACES.
FLATNESS: 1/4 WAVE MAXIMUM @ 633um, 2 FACES.
SURFACE QUALITY: 40-20 PER MIL-PRF-13830, 2 FACES.
CLEAR APERTURE: CENTRAL 80% OF FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, AVERAGE OPTICAL
GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001).
COATING: BROADBAND ANTIREFLECTIVE COATING FOR
> 95% TRANSMISSION FROM 2.10um TO 4.90um
WITH A NORMAL INCIDENCE ANGLE, APPLIED
TO BOTH FACES.

SCD2517-01C

DIAMETER: 76.00mm +/- 0.10mm
THICKNESS: 3.00mm +/- 0.10mm
PARALLELISM: 5 ARC MINUTES MAXIMUM.
EDGE BEVEL: 0.20mm NOMINAL X 45deg, 2 PLACES
SURFACE ACCURACY: 10 WAVES/INCH MAXIMUM, 2 FACES.
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001) +/- 2deg
COATING: ANTIREFLECTIVE COAT FOR < 1.0%
REFLECTANCE PER SURFACE FROM 1300nm TO
1800nm WITH A NORMAL INCIDENCE ANGLE,
APPLIED TO BOTH FACES.
NOTE: COATING MUST BE ACID RESISTANT.

SCD2518-01C

Major Diameter: 66.29mm +/- 0.25mm Minor Diameter: 59.94mm +/- 0.10mm Overall Thickness: 4.00mm +/- 0.10mm Major Diameter Thickness: 1.46mm +/- 0.10mm Edge Bevels: 0.25mm Maximum x 45 Degrees, 3 Edges Parallelism: 5 Arc Minutes Maximum Concentricity: Diameters Within 0.25mm T.I.R Radius @ Intersection of Diameters: 0.10mm Maximum Surface Accuracy: 10 Waves Per Inch Maximum, Both Faces Surface Quality: 60-40 Per Mil-PRF-13830, Both Faces Material Type / Quality: Sapphire, Optical Grade Crystallographic Orientation: c-Plane Coating: Anti-Reflective Coated for < 1.0% Reflectance From 1300nm to 1800nm With a Normal Incidence Angle, Applied to the Major Diameter Face Only Note: Coating Must Be Acid Resistant

SCD2538-02A

DIAMETER: 1.800"+/-.005"
THICKNESS: 0.125"+/-.005"
PARALLELISM: 20 ARC SECONDS MAXIMUM.
FLATNESS: 3 WAVES/INCH MAXIMUM, 2 FACES.
SURFACE FINISH: 10-5 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE
CRYSTALLOGRAPHIC ORIENTATION: (0001)