SCD2330-02A

DIAMETER: 1.000"+/-.005"
THICKNESS: 0.472"+/-.005"
PARALLELISM: NOT SPECIFIED.
EDGE BEVEL: 0.1524" REF. X 30deg +/- 1/2deg TO
FORM A 0.472"+/-.010" LAND DIA.FACE.
0.005"/0.010" X 45deg, OTHER EDGES.
FLATNESS: NOT SPECFIED.
SURFACE FINISH: FACES: POLISHED 80-50 PER MIL-
PRF-13830, 2 PLACES.
30deg BEVEL SURFACE: COMMERCIAL
QUALITY POLISHED, NON-
OPTICAL.
OD WALL SURFACE: FINE GROUND.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001)

SCD2340-01A

CONFIGURATION: DISC, PLANE-PARALLEL
DIAMETER: 30.00mm + 0.00mm /- 0.20mm
THICKNESS: 1.20mm +/- 0.06mm
PARALLELISM: 3 ARC MINUTES MAXIMUM.
EDGE BEVEL: 0.10mm MAXIMUM X 45deg, 2 PLACES.
CLEAR APERTURE: CENTRAL 25.50mm MINIMUM DIAMETER,
2 FACES.
FLATNESS: 1 WAVE MAXIMUM @ 633um, 2 FACES.
SURFACE QUALITY: 80-50 PER MIL-PRF-13830, WITHIN
CLEAR APERTURE, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001) +/- 2deg.
COATING: ANTIREFLECTIVE COATED, ONE FACE ONLY FOR:
R<= 0.5% FROM 1060nm TO 1070nm
R<= 0.5% FROM 1530mm TO 1580nm
POLARIZATRION ARBITRARY
ANGLE OF INCIDENCE: ZERO TO 3 DEGREES.
MARKING: ARROW ON OD SURFACE POINTING TOWARDS
THE COATED FACE.

SCD2364-02A

CONFIGURATION: PLATE, PLANE-PARALLEL
LENGTH: 13.56mm +/- 0.05mm
WIDTH: 3.19mm +/- 0.05mm
THICKNESS: 0.125mm +/- 0.025mm
PARALLELISM: CONTROLLED BY THICKNESS TOLERANCE.
EDGE BEVEL: NOT REQUIRED.
SURFACE ACCURACY: NOT SPECIFIED
CLEAR APERTURE: CENTRAL 90%
SURFACE QUALITY: 80-50 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: RANDOM
COATING: NONE, NOT REQUIRED.

SCD2366-02A

CONFIGURATION: PLATE, PLANE-PARALLEL
LENGTH: 13.56mm +/- 0.05mm
WIDTH: 6.64mm +/- 0.05mm
THICKNESS: 0.250mm +/- 0.025mm
PARALLELISM: CONTROLLED BY THICKNESS TOLERANCE.
EDGE BEVEL: NOT REQUIRED.
SURFACE ACCURACY: NOT SPECIFIED.
CLEAR APERTURE: CENTRAL 90%
SURFACE QUALITY: 80-50 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: RANDOM
COATING: NONE, NOT REQUIRED.

SCD2373-02A

DIAMETER: 50.00mm + 0.00mm /- 0.25mm
THICKNESS: 0.750mm +/- 0.010mm
PARALLELISM: 20 ARC SECONDS MAXIMUM.
TRANSMITTED WAVEFRONT ERROR: 1 WAVE MAXIMUM OVER
ANY 1.00"DIAMETER.
SURFACE QUALITY: 10-5 PER MIL-PRF-13830, 2 FACES.
WITH NOT MORE THAN FIVE No.5 DIGS
WITHIN THE ENTIRE CLEAR APERTURE.
CLEAR APERTURE: CENTRAL 40.00mm MINIMUM DIAMETER.
EDGE BEVELS: 0.20mm MAXIMUM X 45deg, 2 PLACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: M-PLANE +/- 1/2 deg
COATING: NONE, NOT REQUIRED.

SCD2414-01A

MAJOR DIAMETER: 0.500"+.000"/-.005"
MINOR DIAMETER: 0.230"+.000"/-.003"
OVERALL THICKNESS: 0.118"+/-.005"
MAJOR DIAMETER THICKNESS: 0.079"+/-.005"
PARALLELISM: 0.001"/INCH MAXIMUM T.I.R.
CONCENTRICITY: DIAMETERS WITHIN 0.001".
EDGE BEVELS: 0.010"+/-.005" X 45deg, 2 PLACES
(MAJOR DIAMETER EDGES)
NO BEVEL ON MINOR DIAMETER FACE EDGE.
SURFACE ACCURACY: NOT SPECIFIED.
SURFACE QUALITY: 80-50 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001)
COATING: ANTIREFLECTIVE COATED FOR MAXIMUM
TRANSMISSION AT 3.0 MICRONS WITH A
NORMAL INCIDENCE ANGLE, APPLIED TO
BOTH FACES.

SCD2501-02A

OUTER DIAMETER: 38.10mm + 0.00mm /- 0.10mm
INNER DIAMETER: 4.00mm +/- 0.10mm
CONCENTRICITY: OD TO ID WITHIN 0.013mm MAXIMUM TIR
THICKNESS: 4.00mm +/- 0.05mm
PARALLELISM: 2 ARC SECONDS MAXIMUM.
FLATNESS: 1/5 WAVE MAXIMUM @ 633um, 2 FACES.
SURFACE FINISH: 60-40 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001).

SCD2503-01A

DIAMETER: 31.95mm + 0.00mm /- 0.25mm
THICKNESS: 3.00mm +/- 0.05mm
PARALLELISM: 3 ARC MINUTES MAXIMUM.
EDGE BEVEL: PROTECTIVE EDGE BREAK, 2 PLACES.
FLATNESS: 1/4 WAVE MAXIMUM @ 633um, 2 FACES.
SURFACE QUALITY: 40-20 PER MIL-PRF-13830, 2 FACES.
CLEAR APERTURE: CENTRAL 80% OF FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, AVERAGE OPTICAL
GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001).
COATING: BROADBAND ANTIREFLECTIVE COATING FOR
> 95% TRANSMISSION FROM 2.10um TO 4.90um
WITH A NORMAL INCIDENCE ANGLE, APPLIED
TO BOTH FACES.

SCD2517-01C

DIAMETER: 76.00mm +/- 0.10mm
THICKNESS: 3.00mm +/- 0.10mm
PARALLELISM: 5 ARC MINUTES MAXIMUM.
EDGE BEVEL: 0.20mm NOMINAL X 45deg, 2 PLACES
SURFACE ACCURACY: 10 WAVES/INCH MAXIMUM, 2 FACES.
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001) +/- 2deg
COATING: ANTIREFLECTIVE COAT FOR < 1.0%
REFLECTANCE PER SURFACE FROM 1300nm TO
1800nm WITH A NORMAL INCIDENCE ANGLE,
APPLIED TO BOTH FACES.
NOTE: COATING MUST BE ACID RESISTANT.

SCD2542-02A

MAJOR DIAMETER: 65.00mm + 0.00mm /- 0.10mm
MINOR DIAMETER: 55.00mm +/- 0.05mm
OVERALL THICKNESS: 8.00mm +/- 0.20mm
MAJOR DIAMETER THICKNESS: 4.00mm +/- 0.10mm
PARALLELISM: 0.001"/INCH MAXIMUM T.I.R.
CONCENTRICITY: DIAMETERS WITHIN 0.002".
EDGE BEVEL: LIGHT PROTECTVE BEVEL, 3 PLACES.
SURFACE ACCURACY: 5 WAVES MAXIMUM WITH CLEAR
APERTURE, 2 FACES.
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
CLEAR APERTURE: CENTRAL 44.00mm MINIMUM DIAMETER,
2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: RANDOM.
COATING: NONE, NOT REQUIRED.

SCD2557-02A

DIAMETER: 30.00mm + 0.00mm /- 0.10mm
THICKNESS: 3.00mm +/- 0.10mm
PARALLELISM: 10 ARC SECONDS MAXIMUM.
FLATNESS: 1/10 WAVE MAXIMUM, 2 FACES.
EDGE BEVEL: 0.010"/0.015" X 45deg, 2 PLACES.
SURFACE FINISH: 60-40 PER MIL-O-13830. 2 FACES.
CLEAR APERTURE: CENTRAL 85% OF DIAMETER FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001)
COATING: NONE, NOT REQUIRED.

SCD2599-02A

CONFIGURATION: DISC, PLANE-PARALLEL
DIAMETER: 1.575"+/-.005"
THICKNESS: 0.080"+/-.005"
PARALLELISM: 20 ARC SECONDS MAXIMUM.
EDGE BEVEL: LIGHT PROTECTIVE BEVEL, 2 PLACES.
SURFACE ACCURACY: POWER: 1 WAVE MAXIMUM, 2 FACES
(@ 633nm) IRREG: 1/4 WAVE MAXIMUM,2 FACES
TRANSMITTED WAVEFRONT ERROR: 1/10 WAVE MAXIMUM
(@ 633nm) OVER CLEAR APERTURE.
SURFACE QUALITY: E-E PER MIL-F-48616 WITHIN CLEAR
APERTURE, 2 FACES.
CLEAR APERTURE: CENTRAL 0.750" MINIMUM DIAMETER,
2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, CSI HEMEX GRADE
OR EQUIVALENT.
CRYSTALLOGRAPHIC ORIENTATION: (0001) +/- 2deg.
COATING: NONE, UNCOATED SUBSTRATE.

SCD2603-02A

DIAMETER: 31.00mm + 0.00mm /- 0.10mm
THICKNESS: 3.00mm +/- 0.05mm
PARALLELISM: 1 ARC MINUTE MAXIMUM.
EDGE BEVEL: LIGHT PROTECTIVE BEVEL, 2 PLACES
SURFACE ACCURACY: 5 WAVES/INCH MAXIMUM, 2 FACES.
SURFACE QUALITY: 80-50 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001) +/- 2deg.
COATING: NONE, UNCOATED SUBSTRATE

SCD2669-02A

DIAMETER: 0.500"+/-.004"
THICKNESS: 0.0394"+/-.0019"
PARALLELISM: 3 ARC MINUTES MAXIMUM.
FLATNESS: 10 WAVES/INCH MAXIMUM @ 633um, 2 FACES.
EDGE BEVEL: LIGHT PROTECTIVE BEVEL, 2 PLACES.
SURFACE FINISH: 20-10 PER MIL-PRF-13830, 2 FACES.
CLEAR APERTURE: CENTRAL 85% OF DIAMETER FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, CSI WHITE, HIGH
PURITY, VUV TREATED.
CRYSTALLOGRAPHIC ORIENTATION: (0001).
COATING: NONE, NOT REQUIRED.

SCD2673-01A

DIAMETER: 7.493mm +/- 0.050mm
THICKNESS: 0.381mm +/- 0.025mm
PARALLELISM: CONTROLLED BY THICKNESS TOLERANCE.
EDGE BEVEL: LIGHT PROTECTIVE BRUSHED EDGE, 2 PLACE
SURFACE ACCURACY: NOT SPECFIED.
SURFACE QUALITY: 80-50 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: RANDOM
COATING: ANTIREFLECTIVE COATED FOR < 1.6% FROM
780nm TO 1050nm WITH A NORMAL INCIDENCE
ANGLE, APPLIED BOTH FACES.
POLARIZATION: RANDOM ("s" AND "p")
COATING APERTURE: 7.00mm MINIMUM, 2 FACES.

SCD2699-02A

CONFIGURATION: SQUARE, PLANE-PARALLEL L X W: 1.755"+/-.002" (2 PLACES) THICKNESS: 0.080"+/-.002" PARALLELISM: 3 ARC MINUTES MAXIMUM. CORNER/EDGE BEVELS: LIGHT PROTECTIVE BEVEL, ALL CORNERS AND EDGES. SURFACE ACCURACY: NOT SPECIFIED. SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES. MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL QUALITY. CRYSTALLOGRAPHIC ORIENTATION: (0001). COATING: NONE, NOT REQUIRED.

SCD2727-02B

LENGTH: 2.374"+/-.001"
WIDTH: 2.244"+/-.001"
THICKNESS: 0.1245"+/-.0005"
PARALLELISM: 10 ARC SECONDS MAXIMUM
CORNER RADIUS: 0.187"+/-.005", 4 PLACES
EDGE BEVEL: 0.0615" X 45deg ALL ROUND ONE SIDE TO
LEAVE A 0.063"WALL THICKNESS PLUS
BEVEL ON OPPOSITE SIDE.
0.010" NOMINAL X 45deg ALL ROUND OTHER
SIDE.
SURFACE ACCURACY: 1/4 WAVE MAXIMUM, 2 FACES.
(BEST EFFORT)
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001) +/- 2deg.
COATING: NONE, NOT REQUIRED.

SCD2778-02A

MAJOR DIAMETER: 2.993"+/-.002"
OD TAPER ANGLE: 10.00deg +/- 0.25deg
ROUNDNESS: OUT OF ROUNDNESS NOT TO EXCEED.002"TIR.
CONCENTRICITY: MAJOR AND MINOR DIAMETERS WITHIN
0.002" T.I.R.
THICKNESS: 0.125"+/-.005"
PARALLELISM: 0.001"/INCH MAXIMUM, T.I.R.
FLATNESS: 0.0002"/INCH MAXIMUM T.I.R, 2 FACES.
EDGE BEVELS: MAJOR DIA.EDGE: 0.015"+/-.005"
X 45deg, 1 PLACE. (320 MESH FINISH)
MINOR DIA.EDGE: 0.015"+/-.005"
X 45deg, 1 PLACE. (320 MESH FINISH)
SURFACE FINISH: 50-20 PER MIL-O-13830, 2 FACES.
MATERIAL QUALITY: STANDARD OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: RANDOM.

SCD2782-02A

CONFIGURATION: SQUARE PLATE, PLANE-PARALLEL
LENGTH: 13.00mm +/- 0.10mm
WIDTH: 13.00mm +/- 0.10mm
THICKNESS: 1.10mm +/- 0.10mm
PARALLELISM: 1 ARC MINUTE MAXIMUM.
CORNER BEVEL: LIGHT PROTECTIVE BEVEL X 45deg,
4 PLACES.
EDGE BEVELS: LIGHT PROTECTIVE BEVEL X 45deg,
8 PLACES.
SURFACE ACCURACY: 1/2 WAVE MAXIMUM @ 633um,
BOTH FACES.
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: A-PLANE or M-PLANE
WITH THE C-AXIS PROJECTION PARALLEL TO (1) SET OF
THE 13.00mm LONG EDGES. (SEE SKETCH)
COATING: NONE, NOT REQUIRED.

SCD2793-02A

DIAMETER: 30.00mm +/- 0.05mm
THICKNESS: 1.20mm +/- 0.10mm
PARALLELISM: 3 ARC MINUTES MAXIMUM.
FLATNESS: 10 WAVES MAXIMUM @ 0.633um, 2 FACES.
EDGE BEVEL: 0.010" NOMINAL X 45deg, 2 PLACES.
SURFACE FINISH: 40-20 PER MIL-PRF-13830. 2 FACES.
CLEAR APERTURE: CENTRAL 26.00mm MINIMUM DIAMETER.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001)
COATING: NONE, NOT REQUIRED.