SCD1695-01A

SCD3588-02B

DIAMETER: 101.60mm + 0.00mm /- 0.50mm
THICKNESS: 10.10mm +/- 0.50mm
PARALLELISM: 30 ARC SECONDS MAXIMUM
EDGE BEVEL: 1.00mm MAXIMUM FACE WIDTH, 2 PLACES
SURFACE ACCURACY: PWR: 4 FRINGES MAXIMUM, 2 FACES
(@ 633nm) IRR: 1 FRINGE MAXIMUM, 2 FACES
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
SURFACE ROUGHNESS: < 1nm Rq
CLEAR APERTURE: CENTRAL 96.00mm DIAMETER, 2 FACES
MATERIAL TYPE/QUALITY: FUSED SILICA, STD. OPTICAL
QUALITY. n= 1.458 +/- 0.002
@ 633nm. HOMOGENEITY
< 1.0e-5 AT 0.6328um.
COATING: NONE, UNCOATED SUBSTRATE.

SCD3273-02A

CONFIGURATION: DISC, PLANE-PARALLEL
DIAMETER: 8.40mm +/- 0.05mm
THICKNESS: 0.60mm +/- 0.05mm
PARALLELISM: CONTROLLED BY THICKNESS TOLERANCE.
EDGE BEVELS: LIGHT PROTECTIVE BEVELS, 2 PLACES.
SURFACE ACCURACY: NOT SPECIFIED.
SURFACE QUALITY: 80-50 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: FUSED SILICA, OPTICAL GRADE
COATING: NONE, NOT REQUIRED.

SCD3666-01A

DIAMETER: 6.00mm + 0.00mm /- 0.10mm
THICKNESS: 0.125"+/-.0025" (HIGH SIDE OF WEDGE)
WEDGE ANGLE: 15 ARC MINUTES +/- 2 ARC MNIUTES
EDGE BEVEL: LIGHT PROTECTIVE BEVEL, 2 PLACES.
TRANSMITTED WAVEFRONT: 1/4 WAVE MAXIMUM @ 633nm
SURFACE QUALITY: 10-5 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: FUSED SILICA, STANDARD
OPTICAL GRADE.
COATING: ANTIREFLECTIVE COATED FOR MAXIMUM
TRANSMISSION FROM 630nm TO 900nm WITH
A NORMAL INCIDENCE ANGLE, APPLIED TO
BOTH FACES.

SCD2099-05A

DIAMETER: 1.500"+.000"/-.005"
THICKNESS: 0.250"+/-.005"
PARALLELISM: 3 ARC MINUTES MAXIMUM
EDGE BEVEL: 0.010" NOMINAL X 45deg, 2 PLACES.
FLATNESS: 2 WAVES MAXIMUM AT 0.633um, 2 FACES.
SURFACE QUALITY: 60-40 PER MIL-O-13830, 2 FACES.
CLEAR APERTURE: CENTRAL 90% OF DIAMETER, 2 FACES.
MATERIAL TYPE/QUALITY: FUSED SILICA, INFRASIL 2,
WATER-FREE, OPTICAL GRADE.
COATING: NONE, NOT REQUIRED.

SCD1972-02A

CONFIGURATION: PLATE, PLANE-PARALLEL, TAPER EDGES
LENGTH: 2.795"+.000"/-.002"
WIDTH: 0.899"+.000"/-.002"
THICKNESS: 0.100"+/-.005"
EDGE BEVELS: 0.085" NOMINAL X 60 DEGREES, 4 PLACES
0.005" NOMINAL X 45 DEGREES, 4 PLACES
PARALLELISM: 3 ARC MINUTES MAXIMUM.
SURFACE ACCURACY: NOT CRITICAL
SURFACE QUALITY: 60-40 PER MIL-O-13830, 2 FACES.
MATERIAL TYPE/QUALITY: FUSED SILICA, DYNASIL 4000,
NO SUBSTITUTIONS.
COATING: NONE, NOT REQUIRED.

SCD2819-02A

CONFIGURATION: PLATE, RECTANGULAR, PLANE-PARALLEL.
LENGTH: 2.000"+.000"/-.005"
WIDTH: 1.000"+.000"/-.005"
THICKNESS: 0.1181"+/-.0039"
PARALLELISM: 10 ARC SECONDS MAXIMUM.
CORNER BEVELS: LIGHT PROTECITVE BEVEL, 4 PLACES.
EDGE BEVELS: LIGHT PROTECTIVE BEVEL, 8 PLACES.
FLATNESS: 2 WAVES MAXIMUM @ 633um, 2 FACES.
CLEAR APERTURE: CENTRAL 90% OF THE RECTANGULAR
AREA, 2 FACES.
SURFACE QUALTIY: 60-40 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: FUSED SILICA, STANDARD
GRADE, OPTICAL QUALITY.
COATING: NONE, NOT REQUIRED.

SCD2602-02A

DIAMETER: 1.000"+.000"/-.005"
THICKNESS: 3.00mm +/- 0.10mm
PARALLELISM: 1 ARC MINUTE MAXIMUM.
FLATNESS: 1/4 WAVE MAXIMUM, 2 FACES.
EDGE BEVEL: 0.010" NOMINAL X 45deg, 2 PLACES.
SURFACE FINISH: 60-40 PER MIL-PRF-13830. 2 FACES.
CLEAR APERTURE: CENTRAL 90% OF DIAMETER FACES.
MATERIAL TYPE/QUALITY: FUSED SILICA, SUPRASIL 300,
LOW WATER CONTENT.
COATING: NONE, NOT REQUIRED.

SCD3667-01A

DIAMETER: 12.00mm + 0.00mm /- 0.10mm
THICKNESS: 0.125"+/-.0025" (HIGH SIDE OF WEDGE)
WEDGE ANGLE: 15 ARC MINUTES +/- 2 ARC MNIUTES
EDGE BEVEL: LIGHT PROTECTIVE BEVEL, 2 PLACES.
TRANSMITTED WAVEFRONT: 1/4 WAVE MAXIMUM @ 633nm
SURFACE QUALITY: 10-5 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: FUSED SILICA, STANDARD
OPTICAL GRADE.
COATING: ANTIREFLECTIVE COATED FOR MAXIMUM
TRANSMISSION FROM 630nm TO 900nm WITH
A NORMAL INCIDENCE ANGLE, APPLIED TO
BOTH FACES.