A5A013901040

SCD1540-05A

LENGTH: 0.625 +/-.002"
WIDTH: 0.375 +/-.002"
THICKNESS: 0.020 +/-.001"
RADIUS, ONE END ONLY: 0.625"
SLOT WIDTH, RADIUS END: 0.010/0.020"
SLOT DEPTH, RADIUS END: 0.007/0.009"
SLOT LOCATED ON CENTER LINE OF LENGTH OF PLATE,
FULL RADIUS ACCEPTABLE AT BOTTOM OF SLOT.
SURFACE FINISH: ALL SURFACES FINE GROUND.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE
CRYSTALLOGRAPHIC ORIENTATION: RANDOM.

SCD2374-02A

CONFIGURATION: PLATE, PLANE-PARALLEL, 2 THRU-HOLES
LENGTH: 14.00mm +/- 0.10mm
WIDTH: 12.00mm +/- 0.10mm
THICKNESS: 1.00mm +/- 0.05mm
PARALLELISM: NOT SPECIFIED.
HOLE DIAMETER: 2.20mm +/- 0.10mm, 2 PLACES.
HOLE LOCATION: SEE SKETCH.
EDGE BEVEL: LIGHT PROTECTIVE BEVEL, ALL EDGES.
FLATNESS: NOT SPECIFIED.
SURFACE QUALITY: 80-50 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: RANDOM.

A5A910603100

L X W TOLERANCE: +/-.002"
THICKNESS: 0.100"+/-.002"
PARALLELISM: 3 ARC MINUTES MAXIMUM.
FLATNESS: UNCONTROLLED.
SURFACE FINISH: 80-50 PER MIL-PRF-13830, 1 FACE.
FINE GROUND OTHER FACE.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: RANDOM.

SCD1551-01A

L X W: 32.00mm X 32.00mm + 0.10mm - 0.00mm
THICKNESS: 3.18mm + 0.20mm /- 0.00mm
PARALLELISM: 3 ARC MINUTES MAXIMUM.
FLATNESS: 1 WAVE/INCH MAXIMUM WITHIN CLEAR
APERTURE, 2 FACES.
SURFACE QUALITY: 40-20 PER MIL-O-13830, 2 FACES.
CLEAR APERTURE: CENTRAL 30.00mm DIAMETER.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: RANDOM.
COATING: ANTIREFLECTIVE COATED FOR 0.25% MAXIMUM
REFLECTANCE PER SURFACE FROM 800nm TO
820nm WITH A NORMAL INCIDENCE ANGLE,
APPLIED TO BOTH FACES.

SCD1742-01A

CONFIGURATION: PLATE, PLANE-PARALLEL
LENGTH: 19.834mm + 0.000mm /- 0.025mm
WIDTH: 6.350mm + 0.000mm /- 0.025mm
THICKNESS: 0.508mm +/- 0.008mm
CLEAR APERTURE: WITHIN 0.75mm OF EDGES OF
SUBSTRATE.
OPTICAL FLATNESS: < 1.0 WAVE PEAK to VALLEY
IRREGULARITY TRANSMITTED
WAVEFRONT WITHIN CLEAR APERTURE.
PARALLELISM: < 0.10 MILLIRADIAN ( 21 ARC SECONDS)
EDGE SQUARENESS: 0.0001mm MAXIMUM T.I.R.
SURFACE QUALITY: 5-5 PER MIL-O-13830, 2 FACES.
EDGE FINISH: FINE GROUND, NO CHIPS > 50 MICRONS.
CRYSTALLOGRAPHIC ORIENTATION: (0001) +/- 2deg

SCD3765-02B

Configuration: Rectangular Plate, Stepped Face Overall Length: 280.00mm +/- 0.10mm Overall Width: 46.00mm +/- 0.25mm Stepped Width: 35.00mm +/- 0.05mm Step Height: 3.00mm+/- 0.05mm (2 Places) Overall Thickness: 6.00mm +/- 0.10mm Ledge Thickness: 3.00mm Reference Only (2 Places) Parallelism: Controlled by Thickness Tolerances Surface Roughness: < 5 Angstroms RMS on the Critical Face Surface Finish: 20-10 Per MIL-PRF-13830 on the Critical Face Inspection Polish on the End Faces and the Non-Critical Face Edge Chips: No Chips Allowed Along the Critical Face Edges With No Bevels Allowed Edge Bevels: 0.50mm Maximum Face Width x 45 Degrees, 6 Edges Where Shown on Drawing Material Type / Quality: Sapphire, Optical Grade Crystallographic Orientation: c-Plane Coating: None, Not Required

SCD3752-02B

Configuration: Rectangular Plate, Plane-Parallel Faces Overall Length: 280.00mm +/- 0.10mm Width: 11.60mm +/- 0.05mm Thickness: 6.00mm +/- 0.05mm Parallelism: Controlled by Thickness Tolerance Surface Roughness: < 5 Angstroms RMS (Critical Face) Surface Finish: 20-10 Per MIL-PRF-13830 on the Critical Face Inspection Polish on The End Faces and Non-critical Face Edge Chips: No Chips Allowed Along the Critical Polished Face Edges Edge Bevels: 0.50mm Face Width x 45 Degrees, 4 Edges as Shown on Drawing Material Type / Quality: Sapphire, Optical Grade Crystallographic Orientation: c-Plane Coating: None, Not Required

SCD1811-01A

CONFIGURATION: RECTANGULAR PLATE WITH SLOT
LENGTH: 0.752"+/-.002"
WIDTH: 0.280"+/-.002"
THICKNESS: 0.080"+/-.002"
SLOT WIDTH: 0.612"+/-.002"
SLOT DEPTH: 0.040"+/-.002"
STEP WIDTH (ONE SIDE): 0.070"+/-.002"
SURFACE FINISH: ALL SURFACES FINE GROUND.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: RANDOM