MSBH10MD

SCD3176-02A

CONFIGURATION: DISC, STEPPED, PLANO/CONCAVE
MAJOR DIAMETER: 0.920"+/-.005"
MINOR DIAMETER: 0.800"+/-.002" AT BASE OF 10deg
MINOR DIAMETER TAPER: 10 DEGREES +/- 1/4 DEGREE.
OVERALL THICKNESS: 0.165"+/-.005"
MAJOR DIAMETER THICKNESS: 0.100"+/-.005"
CENTER THICKNESS: 0.040"+/-.005"
EDGE BEVELS: MAJ.DIA.TOP: 0.015"+/-.005" X 45deg.
MAJ.DIA.BOT: 0.015"+/-.005" X 52.5deg
MINOR DIA: 0.0125"+/-.0025" X
CONCAVE RADIUS: 0.600"+/-.005"
CONCAVE RADIUS LAND DIA.FACE: 0.740"+/-.005"
CONCAVE ANNULAR RING/FLAT: 0.002"/0.005"WIDE
SURFACE FINISH: OD AND BOTTOM BEVEL: POLISHED.
FACES: OPTICALLY POLISHED 20-10.
ALL OTHER SURFACES: FINE GROUND.
MATERIAL TYPE/QUALITY: SAPPHIRE, HEMLUX or EQUIV.
CRYSTALLOGRAPHIC ORIENTATION: (0001).
COATING: NONE, NOT REQUIRED.

SCD3707-02A

CONFIGURATION: DISC, CONVEX/CONVEX
DIAMETER: 7.00mm + 0.00mm /- 0.025mm
CENTER THICKNESS: 3.00mm +/- 0.05mm
EDGE BEVELS: 0.20mm MAXIMUM FACE WIDTH, 2 PLACES.
CENTERING ERROR: 2 ARC MINUTES MAXIMUM
SPHERICAL RADIUS (1): 15.00mm +/- 4 FRINGES
SPHERICAL RADIUS (2): 30.00mm +/- 4 FRINGES
SURFACE ACCURACY: 1 FRINGE MAXIMUM @ 633nm OVER
CLEAR APERTURE, 2 FACES
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
CLEAR APERTURE: CENTRAL 6.00mm DIAMETER, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: c-PLANE
COATING: NONE, UNCOATED SUBSTRATE
NOTE: SEE SPECIAL OD WALL CONFIGURATION.

SCD1984-01A

CONFIGURATION: DISC, Bi-CONCAVE
DIAMETER: 0.500"+.000"/-.005"
EDGE THICKNESS: 2.00mm +/- 0.04mm
CENTERING ERROR: 3.0 ARC MINUTES MAXIMUM
EDGE BEVELS: 0.005" NOMINAL X 45deg, 2 PLACES
RADIUS OF CURVATURE (SURFACE 1): 152.40mm CONCAVE
+/- 1.52mm
RADIUS OF CURVATURE (SURFACE 2): 152.40mm CONCAVE
+/- 1.52mm
SURFACE ACCURACY: 1/10 WAVE RMS MAXIMUM, 2 FACES.
SURFACE QUALITY: 40-20 PER MIL-O-13830, 2 FACES.
SURFACE ROUGHNESS: 10 ANGSTROMS RMS MAXIMUM,
2 FACES.
MATERIAL TYPE QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001)
COATING: SEE SPECIFICATION SCD1984 Rev.A

SCD2190-02A

CONFIGURATION: DISC, CONCAVE/CONVEX
DIAMETER: 50.00mm + 0.00mm /- 0.10mm
EDGE THICKNESS: 6.50mm +/- 0.10mm
CENTER THICKNESS: 6.00mm +/- 0.10mm
EDGE BEVEL: LIGHT PROTECTIVE BEVEL, 2 PLACES
SPHERICAL RADIUS: CONVEX: 66.00mm +/- 0.33mm
CONCAVE: 60.00mm +/- 0.30mm
CENTERING ERROR: 5 ARC MINUTES MAXIMUM
CLEAR APERTURE: CENTRAL 48.50mm DIAMETER, 2 FACES.
ANNULAR RING DIA: NOT TO EXCEED CLEAR APERTURE.
( CONCAVE FACE )
SURFACE ACCURACY: NOT SPECIFIED.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRPAHIC ORIENTATION: (0001)
COATING: NONE, NOT REQUIRED.

SCD1364-01A

CONFIGURATION: DISC, PLANO-CONCAVE
DIAMETER: 19.05mm + 0.00mm /- 0.25mm
CENTER THICKNESS: 2.50mm +/- 0.50mm
EDGE THICKNESS: 2.80mm REF.ONLY
CENTRATION ERROR: 3 ARC MINUTES MAXIMUM.
EDGE BEVEL: SLIGHT PROTECTIVE BEVEL, 2 PLACES.
FOCAL LENGTH: -200.0mm +/- 1.0%
SPHERICAL RADIUS: 142.64mm +/- 1.426mm (CONVEX)
SURFACE ACCURACY: 1/4 WAVE MAXIMUM, 2 FACES.
SURFACE QUALITY: 20-10 PER MIL-O-13830, 2 FACES.
CLEAR APERTURE: CENTRAL 15.2mm MINIMUM DIA, 2 PLCS
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: C-AXIS PERPENDICULAR
TO PLANO FACE, (0001) NOMINAL.
COATING: ANTIREFLECTIVE COATED FOR >99.0%
TRANSMISSION AT 2.94 MICRONS WITH A
0-12deg INCIDENCE ANGLE, APPLIED TO BOTH
FACES. (RANDOM POLARIZATION)
DAMAGE THRESHOLD: 130 J/cm2, 10 Hz, 100usec PULSE.

SCD1132-01B

CONFIGURATION: DISC, PLANO-CONVEX
DIAMETER: 19.05mm + 0.00mm /- 0.25mm
CENTER THICKNESS: 3.175m +/- 0.125mm
EDGE THICKNESS: 3.075mm REF.ONLY
CENTRATION ERROR: 3 ARC MINUTES MAXIMUM.
EDGE BEVEL: SLIGHT PROTECTIVE BEVEL, 2 PLACES.
FOCAL LENGTH: 600.0mm +/- 1.0%
SPHERICAL RADIUS: 448.90mm +/- 8.98mm (CONVEX)
SURFACE ACCURACY: 1/4 WAVE MAXIMUM, 2 FACES.
SURFACE QUALITY: 20-10 PER MIL-O-13830, 2 FACES.
CLEAR APERTURE: CENTRAL 15.2mm MINIMUM DIA, 2 PLCS
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: C-AXIS PERPENDICULAR
TO PLANO FACE, (0001) NOMINAL.
COATING: DUAL BAND ANTIREFLECTIVE COATED FOR
> 99.0% TRANSMISSION AT 2.94 MICRONS AND
85.0% MINIMUM TRANSMISSION AT 670nm, WITH
A 0-12deg INCIDENCE ANGLE, APPLIED TO
BOTH FACES. (RANDOM POLARIZATION)

SCD3708-02A

CONFIGURATION: DISC, CONVEX/CONVEX
DIAMETER: 14.00mm + 0.00mm /- 0.025mm
CENTER THICKNESS: 3.25mm +/- 0.05mm
EDGE BEVELS: 0.20mm MAXIMUM FACE WIDTH, 2 PLACES.
CENTERING ERROR: 2 ARC MINUTES MAXIMUM
SPHERICAL RADIUS (1): 66.50mm +/- 4 FRINGES
SPHERICAL RADIUS (2): 66.50mm +/- 4 FRINGES
SURFACE ACCURACY: 1 FRINGE MAXIMUM @ 633nm OVER
CLEAR APERTURE, 2 FACES
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
CLEAR APERTURE: CENTRAL 12.50mm DIAMETER, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: c-PLANE
COATING: NONE, UNCOATED SUBSTRATE
NOTE: SEE SPECIAL OD WALL CONFIGURATION.

SCD3308-02A

CONFIGURATION: DISC, Bi-CONVEX
DIAMETER: 10.00mm + 0.000mm /- 0.025mm
CENTER THICKNESS: 2.75mm +/- 0.10mm
EDGE THICKNESS: 2.245mm REF.ONLY
CONVEX RADIUS (1): 25.00mm +/- 12 FRINGES
PLANO SURFACE (2): +/- 12 FRINGES
SPHERICAL SURFACE IRREG: 1.5 FRINGES MAXIMUM AT
633nm, BOTH FACES.
CENTERING ERROR: 2 ARC MINUTES MAXIMUM
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
EDGE BEVELS: 0.25mm MAXIMUM FACE WIDTH X 45deg.
CLEAR APERTURE: CENTRAL 9.00mm MINIMUM DIAMETER
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001)
COATING: NONE, NOT REQUIRED.
MARKING: ARROW ON OD SURFACE POINTING TOWARDS
PLANO FACE.
NOTE: PLEASE NOTE EXCEPTIONS TO DRAWING