SCD2186-01A
$275.00
SAPPHIRE LENS MENISCUS COATED
14.95mm DIA. X 1.25mm EDGE THK
1 in stock
SKU: SCD2186-01A
Categories: SAPPHIRE LENS, Sapphire Lenses
CONFIGURATION: DISC, CONCAVE/CONVEX
DIAMETER: 14.95mm + 0.00mm /- 0.05mm
EDGE THICKNESS: 1.25mm +/- 0.05mm
CENTER THICKNESS: 1.50mm +/- 0.05mm
EDGE BEVEL: 0.12mm MAXIMUM FACE WIDTH, 2 PLACES
SPHERICAL RADIUS: CONVEX: 22.00mm +/- 0.30mm
CONCAVE: 21.80mm +/- 0.40mm
CENTERING ERROR: 0.05mm MAXIMUM T.I.R.
CLEAR APERTURE: CENTRAL 12.00mm DIAMETER, 2 FACES.
ANNULAR RING DIA: 13.50mm +/- 0.25mm(CONCAVE FACE)
SURFACE ACCURACY: CONVEX FACE: 3 WAVES MAXIMUM.
CONCAVE FACE: 1 WAVE MAXIMUM.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRPAHIC ORIENTATION: (0001)
COATING: ANTIREFLECTIVE COATED FOR < 0.40%
RELFECTANCE FROM 1440nm TO 1535nm WITH
A ZERO TO 20 DEGREE INCIDENCE ANGLE,
APPLIED TO CONCAVE FACE ONLY.
ADHESION & DURABILITY PER MIL-M-13508-C
| Weight | 0.1 lbs |
|---|
Related products
SCD1985-01A
CONFIGURATION: DISC, Bi-CONCAVEDIAMETER: 0.500"+.000"/-.005"
EDGE THICKNESS: 2.00mm +/- 0.04mm
CENTERING ERROR: 3.0 ARC MINUTES MAXIMUM
EDGE BEVELS: 0.005" NOMINAL X 45deg, 2 PLACES
RADIUS OF CURVATURE (SURFACE 1): 120.00mm CONCAVE
+/- 1.20mm
RADIUS OF CURVATURE (SURFACE 2): 120.00mm CONCAVE
+/- 1.20mm
SURFACE ACCURACY: 1/10 WAVE RMS MAXIMUM, 2 FACES.
SURFACE QUALITY: 40-20 PER MIL-O-13830, 2 FACES.
SURFACE ROUGHNESS: 10 ANGSTROMS RMS MAXIMUM,
2 FACES.
MATERIAL TYPE QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001)
COATING: SEE SPECIFICATION SCD1985 Rev.A
SCD3706-02A
CONFIGURATION: DISC, CONVEX/CONVEXDIAMETER: 8.40mm + 0.00mm /- 0.025mm
CENTER THICKNESS: 3.60mm +/- 0.05mm
EDGE BEVELS: 0.20mm MAXIMUM FACE WIDTH, 2 PLACES.
CENTERING ERROR: 2 ARC MINUTES MAXIMUM
SPHERICAL RADIUS (1): 15.00mm +/- 4 FRINGES
SPHERICAL RADIUS (2): 15.00mm +/- 4 FRINGES
SURFACE ACCURACY: 1 FRINGE MAXIMUM @ 633nm OVER
CLEAR APERTURE, 2 FACES
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
CLEAR APERTURE: CENTRAL 7.00mm DIAMETER, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: c-PLANE
COATING: NONE, UNCOATED SUBSTRATE
NOTE: SEE SPECIAL OD WALL CONFIGURATION.
SCD2922-01A
DIAMETER: 40.00mm +/- 0.10mmCENTER THICKNESS: 10.00mm +/- 0.05mm
OVERALL THICKNESS: 13.50mm +/- 0.05mm (TO ANNULUS)
SURFACE "1" CONVEX RADIUS: 67.00mm +/- 0.10mm
SURFACE "2" CONCAVE RADIUS: 51.00mm +/- 0.10mm
SPHERICAL SURFACE POWER: CONTROLLED BY RADIUS
(OVER C.A.) TOLERANCE, 2 PLACES
SPHERICAL SURFACE IRREG: 2 FRINGES MAXIMUM AT
(OVER C.A.) 0.633um, 2 FACES.
CLEAR APERTURE: CENTRAL 35.00mm MINIMUM DIAMETER,
2 FACES.
CENTERING ERROR: 0.03mm MAXIMUM T.I.R.
EDGE BEVEL: LIGHT PROTECTIVE BEVEL, 2 PLACES.
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001).
COATING: BROADBAND ANTIREFLECTIVE COATED FOR
MAXIMUM TRANSMISSION FROM 1.0 MICRONS TO
5.0 MICRONS, APPLIED TO BOTH FACES.
SCD3707-02A
CONFIGURATION: DISC, CONVEX/CONVEXDIAMETER: 7.00mm + 0.00mm /- 0.025mm
CENTER THICKNESS: 3.00mm +/- 0.05mm
EDGE BEVELS: 0.20mm MAXIMUM FACE WIDTH, 2 PLACES.
CENTERING ERROR: 2 ARC MINUTES MAXIMUM
SPHERICAL RADIUS (1): 15.00mm +/- 4 FRINGES
SPHERICAL RADIUS (2): 30.00mm +/- 4 FRINGES
SURFACE ACCURACY: 1 FRINGE MAXIMUM @ 633nm OVER
CLEAR APERTURE, 2 FACES
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
CLEAR APERTURE: CENTRAL 6.00mm DIAMETER, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: c-PLANE
COATING: NONE, UNCOATED SUBSTRATE
NOTE: SEE SPECIAL OD WALL CONFIGURATION.
SCD3637-02A
CONFIGURATION: DISC, PLANO-CONVEXDIAMETER: 0.206"+/-.002"
CENTER THICKNESS: 0.0937" REF.
EDGE THICKNESS: 0.078"+/-.002"
CENTRATION ERROR: NOT SPECIFIED.
EDGE BEVEL: LIGHT PROTECTIVE BEVEL/PLANO EDGE ONLY
FOCAL LENGTH: 0.452" REF.
SPHERICAL RADIUS: 0.3505"+/-.0025" (CONVEX)
SURFACE ACCURACY: 5 FRINGES MAXIMUM, 2 FACES.
SURFACE QUALITY: 80-50 PER MIL-PRF-13830, 2 FACES.
CLEAR APERTURE: NOT SPECIFIED.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001)
COATING: NONE, NOT REQUIRED.
SCD3307-02A
CONFIGURATION: DISC, Bi-CONVEXDIAMETER: 10.000mm + 0.000mm /- 0.025mm
CENTER THICKNESS: 3.25mm +/- 0.10mm
EDGE THICKNESS: 2.45mm REF.ONLY
CONVEX RADIUS (1): 75.00mm +/- 12 FRINGES
CONVEX RADIUS (2): 20.00mm +/- 12 FRINGES
SPHERICAL SURFACE IRREG: 1.5 FRINGES MAXIMUM AT
633nm, BOTH FACES.
CENTERING ERROR: 2 ARC MINUTES MAXIMUM
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
EDGE BEVELS: 0.25mm MAXIMUM FACE WIDTH X 45deg.
CLEAR APERTURE: CENTRAL 9.00mm MINIMUM DIAMETER
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001)
COATING: NONE, NOT REQUIRED.
MARKING: ARROW ON OD SURFACE POINTING TOWARDS
75.00mm RADIUS FACE.
NOTE: PLEASE NOTE EXCEPTIONS TO DRAWING
SCD3176-02A
CONFIGURATION: DISC, STEPPED, PLANO/CONCAVEMAJOR DIAMETER: 0.920"+/-.005"
MINOR DIAMETER: 0.800"+/-.002" AT BASE OF 10deg
MINOR DIAMETER TAPER: 10 DEGREES +/- 1/4 DEGREE.
OVERALL THICKNESS: 0.165"+/-.005"
MAJOR DIAMETER THICKNESS: 0.100"+/-.005"
CENTER THICKNESS: 0.040"+/-.005"
EDGE BEVELS: MAJ.DIA.TOP: 0.015"+/-.005" X 45deg.
MAJ.DIA.BOT: 0.015"+/-.005" X 52.5deg
MINOR DIA: 0.0125"+/-.0025" X
CONCAVE RADIUS: 0.600"+/-.005"
CONCAVE RADIUS LAND DIA.FACE: 0.740"+/-.005"
CONCAVE ANNULAR RING/FLAT: 0.002"/0.005"WIDE
SURFACE FINISH: OD AND BOTTOM BEVEL: POLISHED.
FACES: OPTICALLY POLISHED 20-10.
ALL OTHER SURFACES: FINE GROUND.
MATERIAL TYPE/QUALITY: SAPPHIRE, HEMLUX or EQUIV.
CRYSTALLOGRAPHIC ORIENTATION: (0001).
COATING: NONE, NOT REQUIRED.
SCD2190-02A
CONFIGURATION: DISC, CONCAVE/CONVEXDIAMETER: 50.00mm + 0.00mm /- 0.10mm
EDGE THICKNESS: 6.50mm +/- 0.10mm
CENTER THICKNESS: 6.00mm +/- 0.10mm
EDGE BEVEL: LIGHT PROTECTIVE BEVEL, 2 PLACES
SPHERICAL RADIUS: CONVEX: 66.00mm +/- 0.33mm
CONCAVE: 60.00mm +/- 0.30mm
CENTERING ERROR: 5 ARC MINUTES MAXIMUM
CLEAR APERTURE: CENTRAL 48.50mm DIAMETER, 2 FACES.
ANNULAR RING DIA: NOT TO EXCEED CLEAR APERTURE.
( CONCAVE FACE )
SURFACE ACCURACY: NOT SPECIFIED.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRPAHIC ORIENTATION: (0001)
COATING: NONE, NOT REQUIRED.