SCD3176-02A
$300.00
SAPPHIRE LENS PL/CC STEPPED UC
0.920″MAJOR DIA. X 0.165″THK.
2 in stock
SKU: SCD3176-02A
Categories: SAPPHIRE LENS, Sapphire Lenses
CONFIGURATION: DISC, STEPPED, PLANO/CONCAVE
MAJOR DIAMETER: 0.920″+/-.005″
MINOR DIAMETER: 0.800″+/-.002″ AT BASE OF 10deg
MINOR DIAMETER TAPER: 10 DEGREES +/- 1/4 DEGREE.
OVERALL THICKNESS: 0.165″+/-.005″
MAJOR DIAMETER THICKNESS: 0.100″+/-.005″
CENTER THICKNESS: 0.040″+/-.005″
EDGE BEVELS: MAJ.DIA.TOP: 0.015″+/-.005″ X 45deg.
MAJ.DIA.BOT: 0.015″+/-.005″ X 52.5deg
MINOR DIA: 0.0125″+/-.0025″ X
CONCAVE RADIUS: 0.600″+/-.005″
CONCAVE RADIUS LAND DIA.FACE: 0.740″+/-.005″
CONCAVE ANNULAR RING/FLAT: 0.002″/0.005″WIDE
SURFACE FINISH: OD AND BOTTOM BEVEL: POLISHED.
FACES: OPTICALLY POLISHED 20-10.
ALL OTHER SURFACES: FINE GROUND.
MATERIAL TYPE/QUALITY: SAPPHIRE, HEMLUX or EQUIV.
CRYSTALLOGRAPHIC ORIENTATION: (0001).
COATING: NONE, NOT REQUIRED.
| Weight | 0.1 lbs |
|---|
Related products
SCD1985-01A
CONFIGURATION: DISC, Bi-CONCAVEDIAMETER: 0.500"+.000"/-.005"
EDGE THICKNESS: 2.00mm +/- 0.04mm
CENTERING ERROR: 3.0 ARC MINUTES MAXIMUM
EDGE BEVELS: 0.005" NOMINAL X 45deg, 2 PLACES
RADIUS OF CURVATURE (SURFACE 1): 120.00mm CONCAVE
+/- 1.20mm
RADIUS OF CURVATURE (SURFACE 2): 120.00mm CONCAVE
+/- 1.20mm
SURFACE ACCURACY: 1/10 WAVE RMS MAXIMUM, 2 FACES.
SURFACE QUALITY: 40-20 PER MIL-O-13830, 2 FACES.
SURFACE ROUGHNESS: 10 ANGSTROMS RMS MAXIMUM,
2 FACES.
MATERIAL TYPE QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001)
COATING: SEE SPECIFICATION SCD1985 Rev.A
SCD3368-01A
CONFIGURATION: DISC, PLANO-CONCAVEDIAMETER: 1.060"+.000"/-.001"
CENTER THICKNESS: 0.100"+/-.001"
EDGE THICKNESS: 0.130" REF.ONLY
CONCAVE SAG DEPTH: 0.030"+/-.001"
CENTERING ERROR: 0.0002" MAXIMUM T.I.R.
EDGE BEVEL: 0.006"+/-.004" FACE WIDTH, 2 PLACES.
CONCAVE SPHERICAL RADIUS: 4.4115"+/-.0441"
CONCAVE SURFACE IRREG: 1 FRINGE MAXIMUM @ 633nm.
PLANO SURFACE ACCURACY: POWER: 2 FRINGES MAXIMUM.
(@ 633nm) IRREG: 1 FRINGE MAXIMUM.
SURFACE QUALITY: 80-50 PER MIL-PRF-13830, 2 FACES.
SURFACE ROUGHNESS: 127 ANGSTROMS RMS MAXIMUM.
CLEAR APERTURES: CONCAVE FACE: 0.930" MIMIMUM.
PLANO FACE: 0.890" MINIMUM.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001) +/- 2 Deg.
COATING: QUAD-BAND ANTIREFLECTIVE COATING PER
DRAWING 6621013 NOTES 9 & 10.
SCD2922-01A
DIAMETER: 40.00mm +/- 0.10mmCENTER THICKNESS: 10.00mm +/- 0.05mm
OVERALL THICKNESS: 13.50mm +/- 0.05mm (TO ANNULUS)
SURFACE "1" CONVEX RADIUS: 67.00mm +/- 0.10mm
SURFACE "2" CONCAVE RADIUS: 51.00mm +/- 0.10mm
SPHERICAL SURFACE POWER: CONTROLLED BY RADIUS
(OVER C.A.) TOLERANCE, 2 PLACES
SPHERICAL SURFACE IRREG: 2 FRINGES MAXIMUM AT
(OVER C.A.) 0.633um, 2 FACES.
CLEAR APERTURE: CENTRAL 35.00mm MINIMUM DIAMETER,
2 FACES.
CENTERING ERROR: 0.03mm MAXIMUM T.I.R.
EDGE BEVEL: LIGHT PROTECTIVE BEVEL, 2 PLACES.
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001).
COATING: BROADBAND ANTIREFLECTIVE COATED FOR
MAXIMUM TRANSMISSION FROM 1.0 MICRONS TO
5.0 MICRONS, APPLIED TO BOTH FACES.
SCD2190-02A
CONFIGURATION: DISC, CONCAVE/CONVEXDIAMETER: 50.00mm + 0.00mm /- 0.10mm
EDGE THICKNESS: 6.50mm +/- 0.10mm
CENTER THICKNESS: 6.00mm +/- 0.10mm
EDGE BEVEL: LIGHT PROTECTIVE BEVEL, 2 PLACES
SPHERICAL RADIUS: CONVEX: 66.00mm +/- 0.33mm
CONCAVE: 60.00mm +/- 0.30mm
CENTERING ERROR: 5 ARC MINUTES MAXIMUM
CLEAR APERTURE: CENTRAL 48.50mm DIAMETER, 2 FACES.
ANNULAR RING DIA: NOT TO EXCEED CLEAR APERTURE.
( CONCAVE FACE )
SURFACE ACCURACY: NOT SPECIFIED.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRPAHIC ORIENTATION: (0001)
COATING: NONE, NOT REQUIRED.
SCD3306-02A
CONFIGURATION: DISC, Bi-CONVEXDIAMETER: 10.000mm + 0.000mm /- 0.025mm
CENTER THICKNESS: 4.00mm +/- 0.10mm
EDGE THICKNESS: 2.15mm REF.ONLY
CONVEX RADIUS (1): 14.00mm +/- 12 FRINGES
CONVEX RADIUS (2): 14.00mm +/- 12 FRINGES
SPHERICAL SURFACE IRREG: 1.5 FRINGES MAXIMUM AT
633nm, BOTH FACES.
CENTERING ERROR: 2 ARC MINUTES MAXIMUM
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
EDGE BEVELS: 0.25mm MAXIMUM FACE WIDTH X 45deg.
CLEAR APERTURE: CENTRAL 9.00mm MINIMUM DIAMETER
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001)
COATING: NONE, NOT REQUIRED.
MARKING: NONE, NOT REQUIRED.
NOTE: PLEASE NOTE EXCEPTIONS TO DRAWING.
SCD3706-02A
CONFIGURATION: DISC, CONVEX/CONVEXDIAMETER: 8.40mm + 0.00mm /- 0.025mm
CENTER THICKNESS: 3.60mm +/- 0.05mm
EDGE BEVELS: 0.20mm MAXIMUM FACE WIDTH, 2 PLACES.
CENTERING ERROR: 2 ARC MINUTES MAXIMUM
SPHERICAL RADIUS (1): 15.00mm +/- 4 FRINGES
SPHERICAL RADIUS (2): 15.00mm +/- 4 FRINGES
SURFACE ACCURACY: 1 FRINGE MAXIMUM @ 633nm OVER
CLEAR APERTURE, 2 FACES
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
CLEAR APERTURE: CENTRAL 7.00mm DIAMETER, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: c-PLANE
COATING: NONE, UNCOATED SUBSTRATE
NOTE: SEE SPECIAL OD WALL CONFIGURATION.
SCD3308-02A
CONFIGURATION: DISC, Bi-CONVEXDIAMETER: 10.00mm + 0.000mm /- 0.025mm
CENTER THICKNESS: 2.75mm +/- 0.10mm
EDGE THICKNESS: 2.245mm REF.ONLY
CONVEX RADIUS (1): 25.00mm +/- 12 FRINGES
PLANO SURFACE (2): +/- 12 FRINGES
SPHERICAL SURFACE IRREG: 1.5 FRINGES MAXIMUM AT
633nm, BOTH FACES.
CENTERING ERROR: 2 ARC MINUTES MAXIMUM
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
EDGE BEVELS: 0.25mm MAXIMUM FACE WIDTH X 45deg.
CLEAR APERTURE: CENTRAL 9.00mm MINIMUM DIAMETER
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001)
COATING: NONE, NOT REQUIRED.
MARKING: ARROW ON OD SURFACE POINTING TOWARDS
PLANO FACE.
NOTE: PLEASE NOTE EXCEPTIONS TO DRAWING
SCD1983-01A
CONFIGURATION: DISC, Bi-CONCAVEDIAMETER: 0.500"+.000"/-.005"
EDGE THICKNESS: 2.00mm +/- 0.04mm
CENTERING ERROR: 3.0 ARC MINUTES MAXIMUM
EDGE BEVELS: 0.005" NOMINAL X 45deg, 2 PLACES
RADIUS OF CURVATURE (SURFACE 1): 177.80mm CONCAVE
+/- 1.78mm
RADIUS OF CURVATURE (SURFACE 2): 177.80mm CONCAVE
+/- 1.78mm
SURFACE ACCURACY: 1/10 WAVE RMS MAXIMUM, 2 FACES.
SURFACE QUALITY: 40-20 PER MIL-O-13830, 2 FACES.
SURFACE ROUGHNESS: 10 ANGSTROMS RMS MAXIMUM,
2 FACES.
MATERIAL TYPE QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001)
COATING: SEE SPECIFICATION SCD1983 Rev.A