Length: 116.00mm +/- 0.13mm
Width: 78.00mm +/- 0.13mm
Thickness: 3.00mm +/- 0.13mm
Corner Bevels: 0.20mm Nominal x 45 Degrees, 4 Places
Edge Bevels: 0.20mm Nominal x 45 Degrees, 8 Places
Parallelism: 10 Arc Minutes Maximum
Flatness: 1/2 Wave Maximum @ 633nm, Both Faces.
Surface Quality: 60-40 Per MIL-PRF-13830, Both Faces.
Clear Aperture: Central 98.00mm x 72.00mm Rectangular Area, Both Faces.
Material Type / Quality: Sapphire, Optical Grade.
Crystallographic Orientation: c-Plane
Coating: Broad-band Antireflective Coated for
0.50% Maximum Reflectance Per Surface and Also 98.0%
Minimum Average Transmission Both Over the Range of
400nm to 700nm, With a Normal Incidence Angle, Applied to Both Faces.
| Weight | 0.1 lbs |
|---|
Related products
SCD4352-02A
Length: 37.50mm +/- 0.10mm Bottom Width: 7.10mm +/- 0.10mm Top Width: 5.19mm Reference Only Taper on Side Edges: 10.0 Degrees +/- 0.10 Degree (Included Angle) See Drawing Height: 10.90mm +/- 0.10mm Edge Bevels: Light Protective Bevel, All Edges Parallelism: 10 Arc Minutes Maximum Flatness: Not Specified Surface Finish: (2) Faces Polished 60-40 Per MIL-PRF-13830. Faces: 37.50mm x 7.10mm Face 37.50mm x 5.19mm Face All Other Surfaces Fine Ground Material Type / Quality: Sapphire, Optical Grade Crystallographic Orientation: Random Coating: None, Not RequiredSCD3753-02A
LENGTH: 2.187"+/-.005" WIDTH: 1.187"+/-.005"THICKNESS: 0.0385"+/-.0035"
PARALLELISM: 3 ARC MINUTES MAXIMUM.
FLATNESS: 5 WAVES/INCH MAXIMUM, 2 FACES.
SURFACE FINISH: 80-50 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: RANDOM.
COATING: NONE, NOT REQUIRED.
SCD4306-02A
Length: 67.00mm +/- 0.10mm Width: 15.00mm +/- 0.10mm Thickness: 1.00mm +/- 0.050mm Corner Bevels: 0.30mm +/- 0.10mm x 45 Degrees, 4 Places Edge Bevels: 0.15mm +/- 0.075mm x 45 Degrees, 8 Places Parallelism: 5 Arc Minutes Maximum Flatness: 8 Fringes Per Inch Maximum @ 633nm, Both Faces Surface Quality: 60-40 Per MIL-PRF-13830, Both Faces. Material Type / Quality: Sapphire, Optical Grade. Crystallographic Orientation: c-PlaneSCD3502-02A
CONFIGURATION: RECTANGULAR PLATE, PLANE-PARALLEL.LENGTH: 20.00mm +/- 0.10mm
WIDTH: 7.10mm +/- 0.10mm
THICKNESS: 2.50mm +/- 0.10mm
PARALLELISM: 5 ARC MINUTES MAXIMUM.
CORNER BEVELS: 0.10mm NOMINAL X 45deg, 4 PLACES.
EDGE BEVELS: 0.10mm NOMINAL X 45deg, 8 PLACES.
SURFACE ACCURACY: 1/10 WAVE MAXIMUM @ 633nm,
2 FACES.
SURFACE QUALITY: 10-5 PER MIL-PRF-13830, 2 FACES.
MATERIAL TYPE/QUALITY: SAPPHIRE, OPTICAL GRADE.
CRYSTALLOGRAPHIC ORIENTATION: (0001)
COATING: NONE, NOT REQUIRED.